Display - Riello BeSMART Installer And User Manual

3.2

Display

7
6
5
4
3
SET
PROG
2
1
RESET
1 Date and time
2 Operating mode
3 Time program for heating/DHW
4 Room setpoint temperature desired, in relation to the heating program.
If the summer/domestic hot water mode is set, it displays the domestic
hot water setpoint temperature (available with OTBus connection be-
tween the WiFi Box and the boiler or the RF receiver and the boiler or the
BeSMART and the boiler, if provided for by the OTBus protocol).
5 Batteries running low
Room temperature read by the BeSMART thermostat
6
Flame detection (available with OTBus connection between the WiFi
7
Box and the boiler or the RF receiver and the boiler or the BeSMART
and the boiler, if provided for by the OTBus protocol) or heating request
if the BeSMART system is in ON/OFF mode
8 Unit of measure (°C/°F)
9 Heating or DHW mode active
10 Radio frequency communication active with the WiFi Box or with the
boiler RF receiver
11 Cooling mode active
46
8
9
10
11
ESC
MODE