Riello BeSMART Installer And User Manual page 67

Parameter
16 SOFt
ESC
MODE
17 dEgr
ESC
MODE
ESC
MODE
19 HOn
ESC
MODE
Description
BeSMART software version.
Read-only parameter.
Setting the unit of measure.
The value can be set to °C or °F.
The default setting is °C (degrees Centi -
grade). This parameter allows you to set
and view temperatures on the degrees
Centigrade or degrees Fahrenheit scale.
Setting the ON hysteresis for heating or
cooling requests.
The value can be set from 0°C to 2°C; the
default setting is 0.4°C.
The BeSMART processes an ON request
below the target room temperature set (de -
sired room setpoint – H On) if the heating
mode is active, or above the target room
temperature set (desired room setpoint +
H On) if the cooling mode is active.
67
ESC
MODE