Riello BeSMART Installer And User Manual page 52

To activate/deactivate the ONE
HOUR BOOSTER function, from
the HOME screen press the BACK
button (if active, the MAN icon is
displayed).
SET
PROG
RESET
3.6.3 SEMI-AUTOMATIC FILLING
function
The SEMI-AUTOMATIC
function allows the correct system
pressure to be restored and is only
available for boilers equipped with
the relevant function (if OTBus con-
nection available between the WiFi
Box and the boiler or the RF receiver
and the boiler or the BeSMART and
the boiler, if provided for by the OT-
Bus protocol).
If the rIE alarm is quick flash (0,5
sec.) on the HOME screen in the
room temperature field,
SET
PROG
RESET
press the ESC/MODE button and
hold for 5 seconds to start semi-au-
tomatic filling (the message rIE will
stop flashing and remain on). When
releasing the button ESC/MODE the
rIE message starts flashing slowly (2
secs) until the end of the function.
Once the system pressure has been
restored, the BeSMART automat-
ically returns to the normal HOME
screen display.
9
FILLING
3.6.4
In the
FORWARD
5 seconds simultaneously to display
the request for password entry.
ESC
If the password has never been set,
MODE
the symbols "--" are displayed; set
the new password using the UP
and DOWN
SET to confirm and return to the main
menu with the buttons disabled.
The new password is then saved.
The password value must be betwe-
en "0" and "99". The default value is
not set "--".
52
If the SEMI-AUTOMATIC FIL-
LING function is not carried
out within 90 seconds, the rIE
alarm flashes quickly (1sec.)
and is displayed on the HOME
page again.
KEY-LOCK function
main menu
and UP
SET
PROG
RESET
buttons and press
ESC
MODE
press the
buttons for
ESC
MODE