Riello BeSMART Installer And User Manual page 42

Attach the WiFi Box to the boiler cas-
ing using the magnet on the back;
Connect the USB connector on the
previously connected cable to the
WiFi Box OUTPUTS/BOILER output;
USB
Power the WiFi Box via the relevant
cable and power adapter provided.
Resetting the OTBus connection
auto-configuration function
The BeSMART is configured to
function in ON/OFF mode.
Should it be connected to an OTBus
communication bus (wired or wire-
less/radio frequency), the BeSMART
auto-configures to the "Boiler remote
control" operating mode.
To restore the thermostat to its orig-
inal operating mode (ON/OFF), re-
move and then reinsert the batteries.
9
The alarm E82 may be trig-
gered by a change of operat-
ing mode from OTBus to ON/
OFF or vice versa.
42