Riello BeSMART Installer And User Manual page 74

The boiler RF receiver auto-config-
ures to normal operating mode.
9
The light indicators on the boi-
ler RF receivers could differ
from what is indicated in sec-
tion "4 Alarms and operating
statuses" to page 75
9
This may take up to 2 minutes,
after which the BeSMART
automatically returns to the
HOME screen.
Should the link not be successful,
please contact the Authorised Ser-
vice Centre.
Linking the boiler RF receiver to
the BeSMART
The BeSMART
thermostat can be linked to a wire-
less receiver if you want to replicate
the relay functionality on the ther-
mostat in a remote zone (e.g. zone
valve), which is not accessible with
a cable (wireless access).
Follow the procedure below to link
them:
Press the prismatic dome clear
LED button on the boiler RF receiv-
er and hold for 5 seconds until the
green and red LEDs slow flash (1
seconds) at the same time (once
linked the flash returns to normal).
9
The light indicators on the boi-
ler RF receivers could differ
from what is indicated in sec-
tion "4 Alarms and operating
statuses" to page 75
programmable
From the BeSMART HOME screen,
press the ESC/MODE button and
hold for 5 seconds to display the fol-
lowing (alternating) information:
EXAMPLE OF LINKED BESMART
2
1
SET
PROG
RESET
1 Radio frequency channel
2 Receiver (WiFi Box) number
3 Radio frequency address
EXAMPLE OF LINKED BESMART
SET
PROG
RESET
4 Transmitter number (BeSMART)
To complete the link, press the
SET/PROGRAM button or wait for
BeSMART to return to the HOME
screen.
74
ESC
MODE
ESC
MODE
3
4
ESC
MODE