Appendix B Specifications And Default Settings; Switch Default Settings - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Switch Default Settings

The following table describes the switch default settings.
Table 95. Switch default settings
Feature
IP address
Subnet mask
Default gateway
Protocol
Management VLAN ID
Minimum password length
IPv6 management Mode
SNTP client
Global logging
RAM logging
Persistent (FLASH) logging
DNS
SNMP Traps
Auto Save
RMON
TACACS
RADIUS
SSL
Denial of service protection
Dot1x authentication
(IEEE 802.1X)
MAC-based port security
Access control lists (ACL)
Protected ports
Private groups
Head of line blocking prevention
Advertised port speed
Default
192.168.0.239
255.255.255.0
192.168.0.254
DHCP
1
Eight characters
None
Enabled
Enabled
Enabled (Severity level: debug and above)
Disabled
Enabled (No servers configured)
Enabled
Enabled
Enabled
Not configured
Not configured
Disabled
Disabled
Disabled
All ports are unlocked
None configured
None
None
Disabled
Maximum capacity
Specifications and Default Settings
431