Default Settings and Technical Specifications
This appendix provides the default settings and technical specifications for the ProSafe™ 24-Port
L2 Managed Switch with Static Routing GSM7224R and ProSafe™ 48-Port L2 Managed Switch
with Static Routing GSM7248R.
Default Settings
The following table lists the factory default settings for the switches. You can use the RST (reset)
button to return a switch to its factory default settings.
Table A-1. Default Configuration Settings
Features
Port speed
Port duplex
Flow control (half duplex) Enabled
Flow control (full duplex)
Broadcast storm control
Gigabit port type
Management IP
configuration
Password protection
User name
Password
Web access
Java mode
VLAN
IP multicast filtering
Spanning Tree Protocol
Default Settings and Technical Specifications
GSM7224R Default Settings
Auto negotiation
Auto negotiation
Disabled
Enabled
Auto detect
DHCP
Disabled
Admin
(None)
Enabled
Enabled
All ports belong to default VLAN (VLAN
1) as untagged ports
Disabled
Enabled (IEEE 802.1s)
v1.0, November 2007
Appendix A
GSM7248R Default Settings
Auto negotiation
Auto negotiation
Enabled
Disabled
Enabled
Auto detect
DHCP
Disabled
Admin
(None)
Enabled
Enabled
All ports belong to default VLAN
(VLAN 1) as untagged ports
Disabled
Enabled (IEEE 802.1s)
A-1