NETGEAR XS708T User Manual page 67

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. Do one of the following:
• In the Go To Interface field, enter the port using the respective naming convention
(for example, xg1 or l1), and click the Go button.
The entry corresponding to the specified interface is selected.
For more information about naming conventions, see
on page 21.
• Select the port.
7. From the EEE mode menu, select Enable or Disable.
The default is Disable. If the EEE mode is not supported, then N/A is displayed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure Green Ethernet Local and Remote Devices
Use this page to view detailed per-port green Ethernet information and to enable or disable
green Ethernet settings on a single port. Using the green Ethernet features allows for power
consumption savings.

To configure green Ethernet local and remote devices:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
Configure System Information
67
Interface Naming Conventions
Change the Default IP Address of the