NETGEAR XS708T User Manual page 252

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
• Destination L4 Port. Select this radio button to require a packet's TCP/UDP
destination port to match the specified protocol, which you must select from the menu.
The menu includes Other as a selection, which lets you enter a destination port
number.
• Flow Label. Select this radio button to require a packet's flow label to match the
specified flow label. The flow label is a 20-bit number that is unique to an IPv6 packet
and that is used by end stations to signify QoS handling in routers. The flow label can
be specified in the range from 0 to 1048575.
• IP DSCP. Select this radio button to require the packet's IP DiffServ Code Point
(DSCP) value to match the specified IP DSCP keyword code, which you must select
from the menu. The menu includes Other as a selection, which lets you enter an IP
DSCP value from 0 to 63. The DSCP value is defined as the high-order 6 bits of the
Service Type octet in the IP header.
11. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable information that is displayed in the Class
Summary section.
Table 68. IPv6 DiffServ class configuration class summary
Field
Match Criteria
Values
Rename an Existing IPv6 DiffServ Class

To rename an existing IPv6 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration.
Description
The configured match criteria for the specified class.
The values of the configured match criteria.
Configure Quality of Service
252
Change the Default IP Address of the