NETGEAR XS708T User Manual page 56

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The fields in the following tables are visible only when the DayLight Saving (DST) Recurring,
Recurring EU, or Recurring USA radio button is selected.
Table 15. Daylight saving setting is Recurring, Recurring EU, or Recurring USA
Field
Begins At
Ends At
Offset
Zone
The fields in the following table are visible only when the DayLight Saving (DST) Non
Recurring radio button is selected.
Table 16. Daylight saving setting is Non Recurring
Field
Begins At
Ends At
Description
These fields are used to configure the start values of the date and time.
• Week. Configure the start week.
• Day. Configure the start day.
• Month. Configure the start month.
• Hours. Configure the start hours.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Week. Configure the end week.
• Day. Configure the end day.
• Month. Configure the end month.
• Hours. Configure the end hours.
• Minutes. Configure the end minutes.
Configure recurring offset in minutes. The valid range is 1–1440
minutes.
Configure the time zone.
Description
These fields are used to configure the start values of the date and time.
• Week. Configure the start week.
• Day. Configure the start day.
• Month. Configure the start month.
• Hours. Configure the start hours.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Week. Configure the end week.
• Day. Configure the end day.
• Month. Configure the end month.
• Hours. Configure the end hours.
• Minutes. Configure the end minutes.
Configure System Information
56