NETGEAR XS708T User Manual page 279

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
11. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure an HTTPS Authentication List
Use the HTTPS Authentication List to configure the default login list for secure HTTP
(HTTPS).

To configure an HTTPS authentication list:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > Authentication List > HTTPS Authentication
List.
6. Select the check box next to the httpsList name.
7. From the menu in the 1 column, select the authentication method that must be used first in
the selected authentication login list.
If you select a method that does not time out as the first method, such as Local, no other
method is tried, even if you specified more than one method. This setting does not
Change the Default IP Address of the
Manage Device Security
279