Configure Multicast Router Vlan Settings - NETGEAR XS708T User Manual

8-port, 12-port, and 16-port 10-gigabit smart managed pro switch
Hide thumbs Also See for XS708T:
Table of Contents

Advertisement

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Configure Multicast Router VLAN Settings

To configure multicast router VLAN settings:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching> Multicast > MLD Snooping > Multicast Router VLAN Configuration.
6.
From the Interface menu, select the interface for which you want the multicast router to be
enabled.
7.
In the VLAN ID field, specify the VLAN ID.
8.
From the Multicast Router menu, select to enable or disable the multicast router for the
VLAN ID.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Default IP Address of the
Configure Switching
185

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xs712tv2Xs716t

Table of Contents