View Or Delete Mac Acl Bindings In The Mac Binding Table - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
sequence number that is one number greater than the highest sequence number
currently in use for this interface and direction is used. The valid range is 1–4294967295.
8. To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or
LAG so that a check mark displays.
You can add the ACL to several ports and LAGs.
The Ports and LAG tables display the available and valid interfaces for ACL binding. All
nonrouting physical interfaces, VLAN interfaces, and interfaces participating in LAGs are
listed.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the information displayed in the Interface Binding Status table.
Table 82. Interface Binding Status table
Field
Interface
Direction
ACL Type
ACL ID
Sequence Number

View or Delete MAC ACL Bindings in the MAC Binding Table

You can view or delete the MAC ACL bindings in the MAC Binding Table.

To view or delete MAC ACL bindings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Description
The interface of the ACL assigned.
The selected packet filtering direction for the ACL.
The type of ACL assigned to the selected interface and direction.
The ACL number (for an IP ACL) or ACL name for a MAC ACL)
identifying the ACL assigned to the selected interface and direction.
The sequence number signifying the order of the specified ACL relative
to other ACLs assigned to the selected interface and direction.
Manage Device Security
328
Change the Default IP Address of the