XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Modify IGMP Snooping Settings for a VLAN
To modify IGMP snooping settings for a VLAN:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching> Multicast > IGMP Snooping > IGMP VLAN Configuration.
The IGMP Snooping VLAN Configuration page displays.
6.
Select the check box next to the VLAN ID.
7.
Update the values.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Disable IGMP Snooping on a VLAN and Remove It From the
Table
To disable IGMP snooping on a VLAN and remove it from the table:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
Change the Default IP Address of the
Change the Default IP Address of the
Configure Switching
173