Configure Ip Settings; Configure The Router Ip - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual

Configure IP Settings

For information about how to configure and display IP routing data, see the following
sections:
•

Configure the Router IP

• IP Statistics on page 200
Configure the Router IP
Use the IP Configuration page to configure routing parameters for the switch.

To enable routing on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing > IP > IP Configuration.
6. Next to Routing Mode, select Enable.
You must enable routing for the switch before you can route through any of the interfaces.
Routing is also enabled or disabled per VLAN interface. The default value is Disable.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
on page 199
Configure Routing
199
Change the Default IP Address of the