NETGEAR XS708T User Manual page 15

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
WARNING:
When you change the IP address of your administrative system, you
lose your connection to the rest of the network. Be sure to write down
your current network address settings before you change them.
7. Click the OK button.
8. Close all other pop-up windows.

To configure a static address on the switch:
1. Use a straight-through cable to connect the Ethernet port on the administrative system
directly to any port on the switch.
2. Open a web browser on your computer and connect to the management interface.
For more information, see
page 16.
3. Change the network settings on the switch to match those of your network.
For more information, see
After you change the network settings on the switch, return the network configuration on your
administrative system to the original settings.
Access the Web Browser–Based Management Interface
IP Configuration on page
Get Started
15
39.
on