NETGEAR XS708T User Manual page 89

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The following table describes the non-configurable LLDP-MED Neighbors Information that
displays for the selected interface.
Field
LLDP-MED Interface Selection
Remote ID
Capability Information
This section of the page specifies the supported and enabled capabilities that are received in MED TLV on
this port.
Supported Capabilities
Enabled Capabilities
Device Class
Network Policies Information
This section of the page specifies if network policy TLV is received in the LLDP frames on this port.
Media Application Type
VLAN ID
Priority
DSCP
Unknown Bit Status
Tagged Bit Status
Inventory Information
This section of the page specifies if inventory TLV is received in LLDP frames on this port.
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Description
Specifies the remote client identifier assigned to the remote system.
Specifies supported capabilities that are received in MED TLV on this port.
Specifies enabled capabilities that are received in MED TLV on this port.
Specifies device class as advertised by the device remotely connected to the
port.
Specifies the application type: unknown, voicesignaling, guestvoice,
guestvoicesignalling, softphonevoice, videoconferencing, streamingvideo, or
videosignaling.
Information for each application type includes the VLAN ID, priority, DSCP,
tagged bit status and unknown bit status. A port can receive information
about one or many of such application types. The application type is
displayed only if a network policy TLV is received on a port.
Specifies the VLAN ID associated with a particular policy type.
Specifies the priority associated with a particular policy type.
Specifies the DSCP associated with a particular policy type.
Specifies the unknown bit associated with a particular policy type.
Specifies the tagged bit associated with a particular policy type.
Specifies the hardware version of the remote device.
Specifies the firmware version of the remote device.
Specifies software version of the remote device.
Specifies the serial number of the remote device.
Specifies the manufacturer's name of the remote device.
Specifies the model name of the remote device.
Specifies the asset ID of the remote device.
Configure System Information
89