Configure Auto-Voip Oui-Based Properties - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. From the Prioritization Type menu, select Traffic Class or Remark.
This specifies the type of prioritization.
7. From the Class Value menu, specify the CoS tag value to be reassigned for packets
received on the voice VLAN when Remark CoS is enabled.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Configure Auto-VoIP OUI-Based Properties

With Organizationally Unique Identifier (OUI)–based Auto-VoIP, voice prioritization is
provided based on OUI bits.

To configure Auto-VoIP OUI-based properties:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Auto-VoIP > OUI-based > Properties.
Change the Default IP Address of the
Configure Switching
143