NETGEAR XS708T User Manual page 257

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
• Mark CoS. Packets are marked by DiffServ with the specified CoS value before being
forwarded. This selection requires that the Mark CoS field is set. You must select a
CoS value from 0 to 7 from the menu.
• Mark IP Precedence. These packets are marked by DiffServ with the specified IP
Precedence value before being forwarded. This selection requires that the Mark IP
Precedence field is set. You must select an IP precedence value from 0 to 7 from the
menu.
• Mark IP DSCP. Packets are marked by DiffServ with the specified DSCP value before
being forwarded. This selection requires that the DSCP field is set. You must select a
DSCP code from the menu. The menu includes Other as a selection, which lets you
enter an IP DSCP value from 0 to 63. The DSCP value is defined as the high-order
six bits of the Service Type octet in the IP header.
14. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable information displayed on the page.
Table 69. DiffServ policy configuration policy attribute
Field
Policy Name
Policy Type
Member Class Name
Rename an Existing DiffServ Policy

To rename an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
Description
Displays the name of the DiffServ policy.
Displays type of the policy as In.
Displays the name of the class instance within the policy.
Configure Quality of Service
257
Change the Default IP Address of the