Remove An Arp Entry From The Arp Cache - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Remove an ARP Entry From the ARP Cache

Use this page to remove certain entries from the ARP table.

To remove certain entries from the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> ARP > Advanced > ARP Entry Management.
6. From the Remove From Table menu, select the type of ARP entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
• Specific Dynamic/Gateway Entry. Lets you specify the IP address to be removed.
• Specific Static Entry. Lets you specify the IP address to be removed.
7. If you select Specific Dynamic/Gateway Entry or Specific Static Entry, in the Remove IP
Address field, enter the IP address to be removed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Default IP Address of the
Configure Routing
232