Jeep commander 2008 Owner's Manual page 270

Hide thumbs Also See for commander 2008:
Table of Contents

Advertisement

Blower Control
The blower control rotary knob (on the
left) controls the blower and can be set
in one of four speeds and OFF. The
blower fan motor will remain on un-
til the system is turned to the OFF
position or the ignition is turned
OFF.
Temperature Control
The temperature control rotary knob
(in the center) controls the air tem-
perature. The coldest temperature set-
ting is on the extreme left and the
warmest setting on the extreme right
of the rotation. The knob can be posi-
tioned at any point on the dial.
UNDERSTANDING YOUR INSTRUMENT PANEL 269
Mode Control
The mode control rotary knob (on the
right) can be placed in several posi-
tions. Dots between each of the mode
selections identify intermediate modes
that allow the occupants to fine tune
airflow distribution.
Defrost
Air is directed to the windshield through the
outlets at the base of the windshield. Air is also
directed to the front door windows through the side
window demister grilles. Some airflow is delivered to the
floor while in defrost so that comfort can be maintained.
Defrost/Floor
Air flows through the front and rear floor outlets
and the outlets at the base of the windshield. Air is
also directed to the front door windows through the
4

Advertisement

Table of Contents
loading

Table of Contents