Jeep commander 2008 Owner's Manual page 216

entry UNLOCK button twice to unlock the passenger's
doors. When "All Doors 1st Press" is selected, all of the
doors will unlock on the first press of the remote keyless
entry UNLOCK button. To make your selection, press
and release the FUNCTION SELECT button until "Driver
Door 1st Press" or "All Doors 1st Press" appears.
Sound Horn with Lock
When YES (Y) is selected, a short horn sound will occur
when the remote keyless entry LOCK button is pressed.
This feature may be selected with or without the flash
lights on lock/unlock feature. To make your selection,
press and release the FUNCTION SELECT button until
YES (Y) or NO (N) appears.
Flash Lamps with Lock
When YES (Y) is selected, the front and rear turn signals
will flash when the doors are locked or unlocked with the
remote keyless entry transmitter. This feature may be
selected with or without the "Sound Horn with Lock"
UNDERSTANDING YOUR INSTRUMENT PANEL 215
feature. To make your selection, press and release the
FUNCTION SELECT button until YES (Y) or NO (N)
appears.
Headlamp Off Delay
When this feature is selected, the driver can choose to
have the headlights remain on for 0, 30, 60, or 90 seconds
when exiting the vehicle. To make your selection, press
and release the FUNCTION SELECT button until "0,"
"30," "60," or "90" appears.
Automatic High Beams (Available with SmartBeam
Only)
When this feature is selected, the high beam headlights
will deactivate automatically under certain conditions. To
make your selection, press and release the FUNCTION
SELECT button until YES (Y) or NO (N) appears. Refer to
"Lights/SmartBeams — If Equipped" in Section 3 of this
manual for more information.
4