Jeep commander 2008 Owner's Manual page 215

214 UNDERSTANDING YOUR INSTRUMENT PANEL
Press and release the MENU button until Personal Set-
tings displays in the EVIC.
Use the SCROLL button to display one of the following
choices:
Language
When in this display you may select one of three lan-
guages for all display nomenclature, including the trip
functions and the navigation system (if equipped). Press
the FUNCTION SELECT button while in this display to
select English, Espanol, or Francais. Then, as you con-
tinue, the information will display in the selected lan-
guage.
NOTE: The EVIC will not change the UConnect lan-
guage selection. Please refer to "Language Selection" in
the HANDS–FREE COMMUNICATION (UConnect )
section of this manual for details.
Auto Door Locks
When YES (Y) is selected, all of the doors will lock
automatically when the vehicle reaches a speed of 15
mph (24 km/h). To make your selection, press and
release the FUNCTION SELECT button until YES (Y) or
NO (N) appears.
Auto Unlock On Exit
When YES (Y) is selected, all of the doors will unlock
when the vehicle is stopped, and the transmission is in
the PARK or NEUTRAL position, and the driver's door is
opened. To make your selection, press and release the
FUNCTION SELECT button until YES (Y) or NO (N)
appears.
Remote Key Unlock
When "Driver Door 1st Press" is selected, only the
driver's door will unlock on the first press of the remote
keyless entry UNLOCK button. When "Driver Door 1st
Press" is selected, you must press the remote keyless