Jeep commander 2008 Owner's Manual page 188

Hide thumbs Also See for commander 2008:
Table of Contents

Advertisement

CAUTION!
• To prevent damage to the roof of your vehicle, DO NOT
carry any loads on the roof rack without cross rails
installed. The load should be secured and placed on top
of the cross rails, not directly on the roof. If it is necessary
to place the load on the roof, place a blanket or some
other protection between the load and the roof surface.
• To avoid damage to the roof rack and vehicle, do not
exceed the rated load capacity of your cross rail system or
the roof rack system maximum load capacity of 150 lbs
(68 kg). Always distribute heavy loads as evenly as
possible and secure the load appropriately.
• Long loads which extend over the windshield, such as
wood panels or surfboards, should be secured to both the
front and rear of the vehicle.
• Travel at reduced speeds and turn corners carefully when
carrying large or heavy loads on the roof rack. Wind
forces, due to natural causes or nearby truck traffic, can
add sudden upward loads. This is especially true on
large flat loads and may result in damage to the cargo or
your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187
WARNING!
Cargo must be securely tied before driving your
vehicle. Improperly secured loads can fly off the
vehicle, particularly at high speeds, resulting in per-
sonal injury or property damage. Follow the roof rack
"Cautions" when carrying cargo on your roof rack.
3

Advertisement

Table of Contents
loading

Table of Contents