Jeep commander 2008 Owner's Manual page 131

130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• The seat will move to the position located 0.3 in (8
mm) forward of the rear stop if the starting position is
between 0.9 to 2.67 in (23 to 68 mm) forward of the rear
stop when the key is removed from the ignition
switch. The seat will move forward to the memory/
driving position when the key is placed into the
ignition, and turned out of the LOCK position toward
the ACC/ON position.
The Easy Entry/Exit feature will be automatically dis-
abled if the seat is already positioned closer than 0.9 in
(23 mm) forward of the rear stop. At this position, there
is no benefit to the driver by moving the seat for Easy
Exit/Entry.
Each stored memory setting will have an associated Easy
Entry/Exit position.
NOTE: The Easy Entry/Exit feature is not enabled
when the vehicle is delivered from the factory. The Easy
Entry/Exit feature is enabled (or later disabled) through
the programmable features in the Electronic Vehicle
Information Center (EVIC). Refer to Electronic Vehicle
Information Center (EVIC) — Customer Programmable
Features in Section 4 for more information.