Download Print this page

Jeep Automobile Owner's Manual

Chrysler llc

Hide thumbs Also See for Automobile:

Owner's manual (466 pages)

,

Warranty information booklet (48 pages)

,

Service and warranty handbook (42 pages)

Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual and Warranty, Warranty Information Booklet

SECTION

1

INTRODUCTION

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

4

UNDERSTANDING YOUR INSTRUMENT PANEL

5

STARTING AND OPERATING

6

WHAT TO DO IN EMERGENCIES

7

MAINTAINING YOUR VEHICLE

8

MAINTENANCE SCHEDULES

9

IF YOU NEED CONSUMER ASSISTANCE

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457

INDEX

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .365

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .447

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

PAGE

1

2

3

4

5

6

7

8

9

10

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the Automobile and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep Automobile

Page 1: Introduction
TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
Page 3: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....8 Rollover Warning .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION working the vehicle, don’t overload it or expect it to This is a specialized utility vehicle designed for both overcome the laws of nature. Always observe federal, on-road and off-road use. It can go places and perform state, provincial, and local laws wherever you drive.
Page 5: Rollover Warning
INTRODUCTION 5 NOTE: After you read the manual, it should be stored Do not attempt sharp turns or abrupt maneuvers or other in the vehicle for convenient reference and remain with unsafe driving actions that can cause loss of vehicle the vehicle when sold so that the new owner will be control.
Page 6: How To Use This Manual
6 INTRODUCTION Failure to use driver and passenger seat belts provided HOW TO USE THIS MANUAL is a major cause of severe or fatal injury. In fact, the U.S. Consult the table of contents to determine which section government notes that the universal use of existing seat contains the information you desire.
Page 7 INTRODUCTION 7...
Page 8: Warnings And Cautions
8 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....14 Security Alarm System — If Equipped ..20 Wireless Ignition Node (WIN) .
Page 12 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional Transmitters ..25 Power Liftgate — If Equipped ... . .36 Transmitter Battery Service ....25 Occupant Restraints .
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Child Restraint ......60 Safety Checks You Should Make Inside The Vehicle .
Page 14: A Word About Your Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the igni- tion switch with either side up.
Page 15: Fob With Integrated Key (Fobik)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Fob with Integrated Key (FOBIK) The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key, which stores in the rear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead.
Page 16: Ignition Key Removal
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Key Removal after the ignition switch is turned to the LOCK posi- Place the selector lever in “P” (Park). Turn the key to the tion. Opening either front door will cancel this feature. LOCK position, and remove the key.
Page 17: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 SENTRY KEY CAUTION! The Sentry Key Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The An unlocked car is an invitation to thieves. Always system does not need to be armed or activated. Operation remove key from the ignition and lock all doors is automatic, regardless of whether the vehicle is locked when leaving the vehicle unattended.
Page 18: Replacement Keys
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE flash after the bulb check, it indicates that someone used start the vehicle. Cell phones, pagers, or other RF an invalid Fob to start the engine. Either of these condi- electronics will not cause interference with this system. tions will result in the engine being shut off after two (2) All of the Fobs provided with your new vehicle have seconds.
Page 19: Customer Key (Fob) Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 location. This number is required for dealer replacement 2. Insert the second valid key and turn the ignition of Fobs. Duplication of Fobs may be performed at an switch ON within 15 seconds. After ten seconds, a chime authorized dealer or by using the Customer Key Pro- will sound and the Vehicle Security Alarm Indicator gramming procedure.
Page 20: General Information
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your dealer to SECURITY ALARM SYSTEM — IF EQUIPPED have all remaining keys erased from the systems This system monitors the vehicle doors, liftgate, liftgate memory.
Page 21: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 the door lock plunger located on the inside of the doors through the lock plunger located on the inside of the or with the driver’s door key lock cylinder, will not set door, or through a key in the driver’s door key cylinder.
Page 22: To Unlock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Fob with Integrated Key into the To Unlock the Doors ignition switch disables all buttons on that transmitter; Press and release the UNLOCK button on the transmitter however, the buttons on the remaining transmitters will once to unlock the driver’s door, or twice to unlock all continue to work.
Page 23: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Flash Lights with Remote Key Lock Remote Key Unlock,” under “Personal Settings (Cus- This feature will cause the turn signal lights to flash when tomer Programmable Features),” under “Electronic Ve- the doors are locked or unlocked with the transmitter. hicle Information Center (EVIC)”...
Page 24: To Release The Liftgate Flipper Glass
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Release the Liftgate Flipper Glass The panic alarm will stay on for 3 minutes unless you Press the “Flipper Glass/Trunk Release” button on the turn it off by either pressing the PANIC button a second transmitter two times to release the flipper glass.
Page 25: Things To Know Before Starting Your Vehicle 25
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional Transmitters Refer to SENTRY KEY “Customer Key (Fob) Program- ming.” If you do not have a programmed transmitter, contact your dealer for details. Transmitter Battery Service The recommended replacement battery is one CR2032 battery.
Page 26: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information 2. Closeness to a radio transmitter such as a radio station This device complies with part 15 of the FCC rules and tower, airport transmitter, and some mobile or CB radios. RSS 210 of Industry Canada.
Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 To enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the “Unlock” button on the key fob. After the vehicle is unlocked, you have 15 minutes to enter the vehicle, insert the key into the ignition, and move it to the RUN position.
Page 28: Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The vehicle can be started remotely up to a maximum of WARNING! two times. The vehicle is also allowed a maximum of one failed start, where the remote start sequence was initiated •...
Page 29: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 If you press the door lock switch while the keys are in the Power Door Locks The power door lock switch is located on each front door ignition switch, and the driver’s door is open, the doors panel.
Page 30: Child Protection Door Lock
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock on Exit Feature — Only WARNING! Available if Auto Lock is Enabled Avoid trapping anyone in the vehicle in a collision. This feature will unlock all the doors when the driver’s Remember that the rear doors can only be opened door is opened if the vehicle is stopped and in P (Park) or from the outside when the child protection locks are...
Page 31: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WINDOWS Power Windows The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the front passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSORY position.
Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Down Auto Up Feature with Anti-Pinch Protection Both the driver and front passenger window switch has (Driver’s and Front Passenger Door Only) an “Auto Down” feature. Press the window switch past Lift the window switch to the second detent, release, and the first detent, release, and the window will go down the window will go up automatically.
Page 33: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset.
Page 34: Liftgate
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting. LIFTGATE To open the liftgate, pull up (squeeze) on the handle and lift.
Page 35: Liftgate Flipper Glass
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Liftgate Flipper Glass WARNING! The liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on To avoid injury stand back when opening. Glass will the window switch located on the liftgate.
Page 36: Power Liftgate - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Liftgate — If Equipped NOTE: • In the event of a power malfunction to the liftgate, an The power liftgate may be opened manually or by using the button on the remote keyless entry transmitter. Press emergency liftgate latch release can be used to open the button on the remote keyless entry transmitter twice the liftgate.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • If the liftgate handle is pulled while the power liftgate NOTE: • If anything obstructs the power liftgate while it is is opening, the liftgate motor will disengage to allow closing or opening, the liftgate will automatically manual operation.
Page 38: Occupant Restraints
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS WARNING! Some of the most important safety features in your vehicle are the restraint systems. These include the front • Driving with the liftgate open can allow poison- and rear seat belts for the driver and all passengers, front ous exhaust gases into your vehicle.
Page 39: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Research has shown that seat belts save lives, and they WARNING! can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown In a collision, you and your passengers can suffer from the vehicle.
Page 40: Lap/Shoulder Belt Operating Instructions
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions WARNING! 1. Enter the vehicle and close the door. Sit back and • Wearing a seat belt incorrectly is dangerous. Seat adjust the seat. belts are designed to go around the large bones of 2.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Latch Plate Latch Plate To Buckle...
Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too A belt that is buckled into the wrong buckle will not tight, tilt the latch plate and pull on the lap belt.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 5. Position the shoulder belt on your chest so that it is 6. To release the belt, push the red button marked PRESS comfortable and not resting on your neck. The retractor on the buckle.
Page 44: Adjustable Upper Shoulder Belt Anchorage
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage As a guide, if you are shorter than average, you will In the front seating positions, the shoulder belt can be prefer a lower position, and if you are taller than average, adjusted upward or downward to position the belt away you’ll prefer a higher position.
Page 45: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 How To Use The Automatic Locking Mode Energy Management Feature This vehicle has a safety belt system with an energy man- 1. Buckle the combination lap and shoulder belt. agement feature in the front seating positions to help further 2.
Page 46: Seat Belt Pretensioners
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners Enhanced Seat Belt Use Reminder System The driver and front passenger seat belts are equipped (BeltAlert) with a pretensioning device that is designed to remove If the driver’s seat belt has not been buckled within 60 any slack from the seat belt systems in the event of a seconds of starting the vehicle and if the vehicle speed is collision.
Page 47: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 NOTE: The following steps must occur within the first The Enhanced Warning System (BeltAlert) can be reacti- 60 seconds of the ignition switch being turned to the ON vated by repeating this procedure. or START position.
Page 48: Seat Belt Extender
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender Driver And Front Passenger Supplemental If a seat belt is too short, even when fully extended and Restraint Systems (SRS) when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment.
Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Do not use a clothing bar mounted to the coat WARNING! hooks in this vehicle. A clothing bar will impede the proper performance of the window bags. • Do not put anything on or around the front airbag covers or attempt to manually open them.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Here are some simple steps you can take to minimize the seat as far back as possible, and use the proper child risk of harm from a deploying airbag. restraint. See “Child Restraint” in this section. 1.
Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components WARNING! The airbag system consists of the following: • Occupant Restraint Control Module • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work •...
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 How The Airbag System Works Also, the ORC turns on the “Airbag Warning Light” for 2.5 to 8 seconds for a self-check • The Occupant Restraint Control (ORC) Module de- when the ignition is first turned on. After the termines if a frontal, side, or rollover collision is severe self-check, the “Airbag Warning Light”...
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Driver and Passenger Airbag/Inflator Units are • The Side Impact SRS Side Curtain Airbags are de- located in the center of the steering wheel and the right signed to activate only in certain side or rollover side of the instrument panel.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • The Knee Impact Bolsters help protect the knees of passenger as the airbags deploy and unfold. The the driver and the front passenger, and position every- abrasions are similar to friction rope burns or those one for the best interaction with the front airbag.
Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • It is not advisable to drive your vehicle after the Enhanced Accident Response Feature airbags have deployed. If you are involved in another If the airbags deploy after an impact and the electrical collision, the airbags will not be in place to protect you.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Maintaining Your Airbag System NOTE: Perchlorate Material – special handling may apply, www.dtsc.ca.gov/hazardouswaste/ WARNING! perchlorate Airbag Warning Light • Modifications to any part of the airbag system could You will want to have the airbag system ready to inflate cause it to fail when you need it.
Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) In conjunction with other data gathered during a com- In the event of an accident, your vehicle is designed to plete accident investigation, the electronic data may be record up to 5-seconds of specific vehicle data parameters used by DaimlerChrysler Corporation and others to learn (see the following list) in an event data recorder prior to...
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 provided to the custodial entity upon request. General Data Parameters that May Be Recorded: data that does not identify particular vehicles or crashes • Diagnostic trouble code(s) and warning lamp status may be released for incorporation in aggregate crash for electronically-controlled safety systems, including databases, such as those maintained by the US govern- the airbag system...
Page 60: 60 Things To Know Before Starting Your Vehicle
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Cruise control status There are different sizes and types of restraints for children from newborn size to the child almost large • Traction/stability control status enough for an adult safety belt. Always check the child •...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Rearward-facing child seats must NEVER be used in Infants and Child Restraints the front seat of a vehicle with the front passenger • Safety experts recommend that children ride airbag unless the airbag is turned off. An airbag rearward-facing in the vehicle until they are at least deployment could cause severe injury or death to one year old and weigh at least 20 lbs (9 kg).
Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips for getting the most out of your child around the child restraint so that it is not necessary to restraint: use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the •...
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 is too close to the belt path opening on the restraint. NOTE: additional information refer Disconnect the latch plate from the buckle and twist www.seatcheck.org or call 1-866-SEATCHECK. the short buckle-end belt several times to shorten it. Older Children and Child Restraints Insert the latch plate into the buckle with the release Children who weigh more than 20 lbs (9 kg) and who are...
Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE belt-positioning booster seat. The child and belt- LATCH — Child Seat Anchorage System (Lower positioning booster seat are held in the vehicle by the Anchors and Tether for CHildren) lap/shoulder belt. Your vehicle’s second row seat is equipped with the child restraint anchorage system called LATCH.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 kits or retro-fit kits. You are urged to take advantage of all If you are installing LATCH-compatible child restraints the available attachments provided with your child re- in adjacent rear seating positions, you can use the straint in any vehicle.
Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. Tether Strap Mounting Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a Latch Anchorages...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 hook for attachment to the tether strap anchorage and a WARNING! means of adjusting the tension of the strap. Improper installation of a child restraint to the You will first loosen the adjusters on the lower straps and LATCH anchorages can lead to failure of an infant or on the tether strap so that you can more easily attach the child restraint.
Page 68 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the seat belt has an automatic locking retractor, pull the the buckle, turn the buckle around, and insert the latch belt from the retractor until there is enough to allow you plate into the buckle again.
Page 69: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 For the outboard seating positions, route the tether over ENGINE BREAK-IN RECOMMENDATIONS the head rests, and attach the hook to the tether anchor A long break-in period is not required for the engine in located on the back of the seat.
Page 70: Safety Tips
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not inhale exhaust gases. They contain carbon A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be monoxide, a colorless and odorless gas which can kill. considered as a normal part of the break-in and not Never run the engine in a closed area, such as a interpreted as an indication of difficulty.
Page 71: Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Airbag Warning Light Safety Checks You Should Make Inside The Vehicle The light should come on and remain on for 6 to 8 seconds as a bulb check when the ignition switch is first Seat Belts turned on.
Page 72: Safety Checks You Should Make Outside The Vehicle
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Outside The Lights Have someone observe the operation of all exterior lights Vehicle while you work the controls. Check turn signal and high Tires beam indicator lights on the instrument panel. Examine tires for excessive tread wear or uneven wear patterns.
Page 73 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......78 Heated Remote Control Mirrors — If Equipped .
Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your 50/50 Third Row Folding Seat — UConnect™ System ....100 If Equipped .
Page 75 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 Automatic Headlight System — If Equipped . . 126 Mist ....... 132 SmartBeams —...
Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electronic Brake Control System ... . 139 Rear Park Assist Sensors ....154 ABS (Anti-Lock Brake System) .
Page 77 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 Reprogramming a Single HomeLink Button . . 164 Sunroof Fully Closed ....168 Security ......164 Command-View™...
Page 78: Mirrors
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Inside Day/Night Mirror The mirror should be adjusted to center on the view Annoying headlight glare from vehicles behind you can through the rear window.
Page 79: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 Outside Mirrors To receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Page 80: Exterior Mirrors Folding Feature
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exterior Mirrors Folding Feature After selecting a mirror move the knob in the same All exterior mirrors are hinged and may be moved either direction you want the mirror to move. Use the center off forward or rearward to resist damage.
Page 81: Heated Remote Control Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 Power mirror preselected positions can be controlled by the optional Memory Seat Feature. Refer to “Driver Memory Seat” in this section for details. Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defrost.
Page 82: Hands-Free Communication (Uconnect™) - If Equipped
• www.chrysler.com/uconnect UConnect™ is a voice-activated, hands-free, in- vehicle • www.dodge.com/uconnect communications system. UConnect™ allows you to dial • www.jeep.com/uconnect a phone number with your cellular phone using simple voice commands (e.g., Call” “Mike” ”Work or Dial” • or call 1–877–855–8400 “248-555-1212 ).
Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 The UConnect™ phone book enables you to store up to Phone Button 32 names and four numbers per name. Each language has The rearview mirror contains the microphone a separate 32-name phone book accessible only in that for the system (depending on the type of language.
Page 84: Operation
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be The UConnect™ system is fully integrated with the vehicle’s audio system. The volume of the UConnect™ used. For example, instead of saying Setup and then system can be adjusted either from the radio volume Phone Pairing, the following compound command control knob or from the steering wheel radio control...
Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Help Command To complete the pairing process, you will need to refer- If you need assistance at any prompt, or if you want to ence your cellular phone owner’s manual. The UCon- know your options at any prompt, say Help following nect™...
Page 86 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For identification purposes, you will be prompted to Dial by Saying a Number give the UConnect™ system a name for your cellular • Press the “Phone” button to begin. phone. Each cellular phone that is paired should be •...
Page 87 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Call by Saying a Name Add Names to Your UConnect™ Phonebook • Press the “Phone” button to begin. NOTE: Adding names to phone book is recommended when vehicle is not in motion. • After the Ready prompt and the following beep, say •...
Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After you are finished adding an entry into the phone Exchange Profile (OBEX). Please see your phone owners’ book, you will be given the opportunity to add more manual for specific instructions on how to send these phone numbers to the current entry or to return to the entries from your phone.
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Edit Entries in the UConnect™ Phonebook Phonebook Edit can be used to add another phone number to a name entry that already exists in the NOTE: Editing names in the phone book is recom- phonebook.
Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After confirmation, the phone book entries will be from the list, press the Voice Recognition button while the UConnect™ system is playing the desired deleted. entry and say Delete. • Note that only the phone book in the current language •...
Page 91: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 • The UConnect™ system will then prompt you as to the call, press and hold the ’Phone’ button until you hear a number designation you wish to call. single beep indicating that the incoming call was rejected. •...
Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE entry you wish to call. The first call will be on hold while Conference Call the second call is in progress. To go back to the first call, When two calls are in progress (one active and one on refer to Toggling Between Calls.
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 hold may not become active automatically. This is cell Call Continuation phone dependent. To bring the call back from hold, press Call continuation is progression of a phone call on and hold the “Phone” button until you hear a single UConnect™...
Page 94: Uconnect™ System Features
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnect™ System Features Emergency Assistance If you are in an emergency and the mobile phone is Language Selection reachable: To change the language that the UConnect™ system is • Pick up the phone and manually dial the emergency using, number for your area.
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 The UConnect™ system does slightly lower your chances Please refer to the 24-Hour “Towing Assistance” cover- of successfully making a phone call as to that for the cell age details in the Warranty information booklet and on phone directly.
Page 96 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can use your UConnect™ system to access a voice- entries. To use this feature, dial the number you wish to mail system or an automated service, such as, paging call and then press the “Voice Recognition” button and service or automated customer service.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 a , you could press the “Voice Recognition” button and notification to inform you of your phone and network say Pair a Phone to select that option without having to status when you are attempting to make a phone call listen to the rest of the voice prompt.
Page 98: Advanced Phone Connectivity
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE may feel that the call did not go through even though the Advanced Phone Connectivity call is in progress. Once your call is answered, you will Transfer Call to and from Cellular Phone hear the audio.
Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • Press the “Phone” button to begin. List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Setup Select Phone and follow the prompts. •...
Page 100: Things You Should Know About Your Uconnect™ System
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • At the next prompt, say Delete and follow the From outside the UConnect™ mode (e.g. from radio prompts. mode) • You can also press the “Voice Recognition” button • Press and hold the “Voice Recognition” button for 5 anytime while the list is being played, and then choose seconds until the session begins, or, the phone you wish to delete.
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • fully closed windows, Voice Recognition (VR) • For best performance, adjust the rear view mirror to • dry weather condition. provide at least ⁄ inch (1 cm) gap between the • Even though the system is designed for users speaking overhead console (if equipped) and the mirror.
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can say O (letter O ) for 0 (zero). 800 must be • Performance, such as audio clarity, echo, and loudness spoken eight-zero-zero. to a large degree rely on the phone and network, and not the UConnect™...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103...
Page 104 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105...
Page 106 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts. three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 108: General Information
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the Adjusting a seat while the vehicle is moving is following conditions: dangerous.
Page 109: Manual Lumbar Support Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 WARNING! WARNING! • It is extremely dangerous to ride in a cargo area, Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a inside or outside of a vehicle.
Page 110: Way Driver's Power Seat
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8 - Way Driver’s Power Seat 4 - Way Passenger’s Power Seat — If Equipped The driver’s power seat switches are located on the The front passenger’s power seat switches are located on outboard side of the driver’s seat lower side trim.
Page 111: Front Heated Seats-If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 center of the instrument panel. After turning on the ignition, you can choose from High, Low, or Off heat settings. Amber LEDs on the side of each switch indicate the level of heat in use. Two LEDs are illuminated for high, one for low, and none for off.
Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the switch a second time will select low-level WARNING! heating. Pressing the switch a third time will shut the heating elements off. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, When high-temperature heating is selected, the heaters spinal cord injury, medication, alcohol use, exhaus-...
Page 113: 40/20/40 Second Row Folding Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 40/20/40 Second Row Folding Seat Fold and Tumble Second Row Seat The left, center, or right side of the second row seat can be lowered to allow for extended cargo space, and still maintain some rear seating room.
Page 114 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not drive the vehicle with the outer second row seats in the tumbled position. The outer second row seats are only intended to be tumbled for entry and exit to the third row seat. Failure to follow these instructions could result in personal injury.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Folding Middle Seatback (Second Row Seat) 1. Pull the release strap. Release Strap Release Strap...
Page 116 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Lower the center seatback. Center Seat Armrest (Second Row Seat) — If Equipped The second row center seat may be equipped with a armrest. Pull strap to lower armrest. Folding Center Seatback Armrest (Second Row Seat)
Page 117: 50/50 Third Row Folding Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 50/50 Third Row Folding Seat — If Equipped To Lower Rear Seat Either side of the third row seat can be lowered to allow for extended cargo space, and still maintain some rear seating room.
Page 118: Driver Memory Seat - If Equipped
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise Rear Seat WARNING! 1. Open the tailgate. The cargo area in the rear of the vehicle (with the rear 2. Detach pull strap from back of seat, and pull seatback seatbacks in the locked-up or folded down position) upward until it locks into place.
Page 119: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store a new one. 1.
Page 120: Memory Position Recall
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Turn on the radio and set the radio station presets (up 11. Select Remote Linked to Memory in the Electronic to 10 AM and 10 FM stations can be set). Vehicle Information Center (EVIC) and enter Yes or select Use Factory Settings from the EVIC and enter 6.
Page 121: To Disable A Transmitter Linked To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 To recall the memory settings for driver one, press To Disable A Transmitter Linked to Memory memory button number 1 on the driver’s door or the 1. Turn the ignition switch to the OFF position and “Unlock”...
Page 122: Easy Entry/Exit Seat
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once programmed, all transmitters linked to approximately 2.5 inches (60 mm) when the key is memory can be easily enabled or disabled at one time. placed into the ignition and turned out of the LOCK Refer to Remote Linked to Memory under Electronic position.
Page 123: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 NOTE: The Easy Entry Easy Exit feature is not enabled when the vehicle is delivered from the factory. The Easy Entry Easy Exit feature is enabled (or later disabled) through the programmable features in the Electronic Vehicle Information Center (EVIC).
Page 124: Lights
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then, reach under the hood, move safety latch to the left, WARNING! and lift the hood. To prevent possible damage, do not slam the hood to close it. Use a firm downward push at If the hood is not fully latched, it could fly up when the center of the hood to ensure that both latches engage.
Page 125: Battery Saver Feature-Exterior/Interior
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Battery Saver Feature—Exterior/Interior Lights If the multi-function control lever is left in the interior light position, parking light position, or the headlight position when the ignition switch is moved to the OFF position, the battery saver feature will automatically turn off the exterior and interior lights after eight minutes.
Page 126: Automatic Headlight System - If Equipped
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlight System — If Equipped approximately four minutes after the wipers completely Turn the end of the multi-function control lever to the stop. Refer to “Windshield Wipers and Washers” in this third detent to activate the automatic headlight system. section for more information.
Page 127: Instrument Panel And Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 NOTE: If the windshield or SmartBeam mirror is re- 2. Pull back on the multi-function control lever once placed, the SmartBeam mirror must be re-aimed to again to re-activate the system. ensure proper performance. See your local authorized NOTE: Broken, muddy, or obstructed headlights and dealer.
Page 128: Daytime Running Lights - If Equipped
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the second detent above the dimmer range turns the Lights-On Reminder interior lights on. Rotating the control to the “Off” If the headlights or parking lights are on after the ignition (extreme bottom) position disables all the interior lights, is turned OFF, a chime will sound when the driver’s door even when the doors and liftgate are open.
Page 129: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: Proper aim and adjustments of the front fog High Beam Switch lights should be made to prevent excessive glare for other Push the multi-function control lever away from you to drivers. switch the headlights to high beam. Pull the lever to- wards you to switch the headlights back to low beam.
Page 130: Interior Lights
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights The interior lighting consists of courtesy lights mounted below the instrument panel, an overhead console light assembly which contains both driver and passenger reading lights, reading lights located above the rear doors, and a rear cargo light.
Page 131: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 WINDSHIELD WIPERS AND WASHERS The front and rear wipers and washers are operated by a switch in the right side control lever. Turn the end of the control lever to select “Lo,” “Hi,” or one of the five speed sensitive intermittent windshield wiper speeds.
Page 132: Mist
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To use the washer, pull the lever toward you and hold Mist while spray is desired. If the lever is pulled while in the Use this feature when weather conditions make occa- delay range, the wiper will operate for several seconds sional usage of the wipers necessary.
Page 133: Rain Sensing Wipers-If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • The rain sensing feature may not function properly when Rain Sensing Wipers—If Equipped This feature senses moisture on the windshield and ice, or dried salt water is present on the windshield. automatically activates the wipers for the driver. The •...
Page 134: Tilt/Telescoping Steering Column
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Transmission in N (Neutral) Position — When the ignition is ON, and the transmission is in the N (Neutral) position, the rain sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the N (Neutral) position.
Page 135: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle. ADJUSTABLE PEDALS —...
Page 136: Electronic Speed Control - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted with the ignition OFF. CAUTION! • The pedals can be adjusted while driving. Do not place any article under the adjustable pedal’s • The pedals cannot be adjusted when the vehicle is in R or impede its ability to move as it may cause damage (Reverse) or when the Speed Control is ON.
Page 137: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Leaving the Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it.
Page 138: To Deactivate
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate Tapping “RESUME ACCEL” once will result in a 2 mph A soft tap on the brake pedal, pulling the speed control (3 km/h) (3.7L/4.7L models) or a 1 mph (2 km/h) (5.7L lever towards you “CANCEL”, or normal brake or clutch models) speed increase.
Page 139: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 To Accelerate For Passing ELECTRONIC BRAKE CONTROL SYSTEM Depress the accelerator as you would normally. When the Your vehicle is equipped with an advanced electronic pedal is released, the vehicle will return to the set speed. brake control system that includes ABS (Anti-Lock Brake System), TCS (Traction Control System), BAS (Brake Using Speed Control On Hills...
Page 140: Tcs (Traction Control System)
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE help avoid skidding on slippery surfaces during braking. TCS (Traction Control System) Refer to “Anti-Lock Brake System” in Section 5 of this This system monitors the amount of wheel spin of each of manual for more information about ABS.
Page 141: Bas (Brake Assist System)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 BAS (Brake Assist System) WARNING! The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The BAS (Brake Assist System) cannot prevent the natu- system detects an emergency braking situation by sens- ral laws of physics from acting on the vehicle, nor can ing the rate and amount of brake application and then it increase the traction afforded by prevailing road...
Page 142: Erm (Electronic Roll Mitigation)
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ERM (Electronic Roll Mitigation) NOTE: Anytime the ESP system is in the “Full Off” This system anticipates the potential for wheel lift by mode, ERM is disabled. Refer to ESP (Electronic Stability monitoring the driver’s steering wheel input and the Program) for a complete explanation of the available ESP speed of the vehicle.
Page 143: Esp (Electronic Stability Program)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • Oversteer - when the vehicle is turning more than ESP (Electronic Stability Program) appropriate for the steering wheel position. This system enhances directional control and stability of • Understeer - when the vehicle is turning less than the vehicle under various driving conditions.
Page 144 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High Range (4WD Models) or 2WD Models WARNING! ESP (Electronic Stability Program) cannot prevent the This is the normal operating mode for ESP in 4WD high natural laws of physics from acting on the vehicle, range and in 2WD vehicles.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 or gravel conditions and more wheel spin than ESP NOTE: To improve the vehicle’s traction when driving would normally allow is required to gain traction. To with snow chains, or starting off in deep snow, sand, or turn ESP on again, momentarily depress the ESP OFF”...
Page 146 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In this mode, ESP and TCS, except for the “limited slip” WARNING! feature described in the TCS section, are turned off until the vehicle reaches a speed of 40 mph (64 km/h). At 40 With the ESP switched off, the enhanced vehicle mph (64 km/h) the system returns to “Partial Off”...
Page 147: Tsc (Trailer Sway Control)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 a speed of 40 mph (64 km/h). At 40 mph (64 km/h), the WARNING! normal ESP stability function returns but TCS remains off. When the vehicle speed drops below 35 mph (56 With the ESP switched off, the enhanced vehicle km/h), the ESP system shuts off.
Page 148: Hsa (Hill Start Assist) (4Wd Models With Nv245 Two-Speed Transfer Case Only)
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE swaying. Always use caution when towing a trailer and HSA (Hill Start Assist) (4WD Models with NV245 follow the tongue weight recommendations. Refer to Two–Speed Transfer Case Only) “Trailer Towing” in Section 5 of this manual for more The HSA system is designed to assist the driver when information on towing a trailer with your vehicle.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 HSA Activation Criteria WARNING! The following criteria must be met in order for HSA to activate: There may be situations on minor hills (i.e., less than • Vehicle must be stopped. 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling •...
Page 150: Hdc (Hill Descent Control) (4Wd Models With Nv245 Two-Speed Transfer Case Only)
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HSA Off WARNING! If you wish to turn off the HSA system, it can be done using the Customer Programmable Features in the Elec- • If you use a trailer brake controller with your tronic Vehicle Information Center (EVIC).
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 and will only activate when the vehicle is descending a hill. It will usually not activate on level ground. The HDC speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected.
Page 152: Esp/Bas Warning Lamp And Esp/Tcs Indicator Light
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HDC also has the capability to sense rough terrain, and WARNING! will automatically adjust to a slightly slower set speed (about.3 mph (.5 km/h) than normal. HDC is only intended to assist the driver in control- ling vehicle speed when descending hills.
Page 153: Rear Park Assist System- If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 If the “ESP/BAS Warning Lamp” comes on REAR PARK ASSIST SYSTEM— IF EQUIPPED continuously with the engine running, a mal- The Rear Park Assist System provides visual and audible function has been detected in either the ESP or indications of the distance between the rear fascia and the the BAS system, or both.
Page 154: Rear Park Assist Sensors
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Park Assist Sensors The four Rear Park Assist Sensors, located in the rear fascia, monitor the area behind the vehicle that is within the sensors’ field of view. The monitored area seems oval in shape.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 The system dimly illuminates the two outer most yellow LED’s when it is ON and detecting no obstacles. The following chart shows the warning display operation when the system is detecting an obstacle: WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM:...
Page 156: Enable/Disable The Rear Park Assist System
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Rear Park Assist system will MUTE the When the switch is pressed to disable the system, the radio, if on, when the system is sounding an audio tone. instrument cluster will display the PARK ASSIST DIS- ABLED message.
Page 157: Cleaning The Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Cleaning the Rear Park Assist System WARNING! Clean the Rear Park Assist Sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do Drivers must be careful when backing up even when not scratch or poke the sensors.
Page 158: Turning The Rear Camera Off
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Select “ON” at the “Rear Camera” screen. Highlight OVERHEAD CONSOLE — IF EQUIPPED “DONE” and press ENTER. The rear camera is now The overhead console contains an optional universal enabled. garage door opener (HomeLink ), storage for sunglasses, and optional power sunroof switches.
Page 159: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 GARAGE DOOR OPENER — IF EQUIPPED WARNING! HomeLink replaces up to three remote controls (hand held transmitters) that operate devices such as garage Your motorized door or gate will open and close door openers, motorized gates, lighting, or home security while you are training the Universal Transceiver.
Page 160: Programming Homelink
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE It is recommended that a new battery be placed in the WARNING! hand-held transmitter of the device being programmed to HomeLink for more efficient training and accurate Vehicle exhaust contains carbon monoxide, a danger- transmission of the radio-frequency signal.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Then release both the HomeLink and hand-held trans- If the EVIC display still states “CHANNEL # TRAIN- mitter buttons. ING” repeat Step 3. If the EVIC display states “DID NOT TRAIN” repeat Step NOTE: After training a HomeLink channel, if the 3.
Page 162 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This can usually be found where the hanging antenna 6. Firmly press and release the “learn” or “training” wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open &...
Page 163: Gate Operator/Canadian Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 has successfully accepted the frequency signal. The Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter sig- EVIC display will change from “CHANNEL # TRAIN- nals to “time-out” (or quit) after several seconds of ING”...
Page 164: Reprogramming A Single Homelink Button
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming a Single HomeLink Button The HomeLink Universal Transceiver is disabled when To re-program a channel that has been previously the Vehicle Security Alarm is active. trained, follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
Page 165: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules part 15 and Industry The power sunroof switch is located on the overhead Canada RSS-210. Operation is subject to the following console.
Page 166: Opening Sunroof - Express
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof - Express WARNING! Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof • Never leave children in a vehicle, with the keys in will open fully, then stop automatically.
Page 167: Pinch Protect Override
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 sunroof will automatically retract. Remove the obstruc- Sunshade Operation tion if this occurs. Next, press the switch forward and The sunshade can be opened manually. However, the release to Express Close. sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing,...
Page 168: Sunroof Maintenance
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance NOTE: Hold onto shade handle until shade is com- Use only a non-abrasive cleaner and a soft cloth to clean pletely open or closed. the glass panel. Ignition Off Operation The power sunroof switches remain active for 10 minutes after the ignition switch has been turned off.
Page 169: Power Outlet
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 POWER OUTLET Front Power Outlet To the left and right of the convenience tray (lower center of instrument panel) is an outlet for electrically powered accessories. Pull lightly on the tab of the plastic cover to access the outlet.
Page 170: Power Inverter - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED CAUTION! There is a 110–volt, 150–watt inverter outlet located on the back of the center console to convert DC current to Electrical Outlet Use With Engine Off AC current. This outlet can be used to power small •...
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Press the power inverter switch (located on the upper inverter status indicator turns ON. The status indicator of switch bank) to turn the power on to the outlet. Press the the AC power inverter indicates whether the inverter is switch again to turn the power off.
Page 172: Cup Holders
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS NOTE: The cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger Front Cup Holders cup depression towards the passenger seat, but the top In the center console, there are two cup holders for the surface will not be flush with the console surface.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Cup Holders (Third Row Seat) The third row seat passengers have cup holders on the left and right rear trim panels. Cup Holders (Second Row Seat) Cup Holders (Third Row Seat)
Page 174: Cargo Area Features
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Cargo Load Floor The panel in the load floor is reversible for added utility. One side is carpeted and the other side features a plastic lined tray which holds a variety of items. The cargo load floor is held by spring loaded latches.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 2. Pull up on loop(s) and twist 90 degrees, so they are 4. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray. perpendicular (straight up) to the slotted hole in tray. 3.
Page 176: Rear Window Features
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch up to the DEL (Delay) position or the ON position will activate the wiper.
Page 177: Rear Window Defroster - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 the rear wiper switch or the ignition switch needs to be CAUTION! turned OFF and ON to restart the rear wiper. To avoid damaging the electrical conductors of the Adding Washer Fluid rear window defroster, do not use scrapers, sharp The fluid reservoir for the windshield washers and the instruments, or abrasive window cleaners on the rear window washer is shared.
Page 178 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If not equipped, your authorized dealer can order and NOTE: If the rear cross rail (or any metallic object) is install Mopar cross rails built specifically for this roof placed over the satellite radio antenna (if equipped), you rack system or a number of after market rails that are may experience interruption of satellite radio reception.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 CAUTION! WARNING! • To prevent damage to the roof of your vehicle, DO NOT Cargo must be securely tied before driving your carry any loads on the roof rack without cross rails vehicle. Improperly secured loads can fly off the installed.
Page 181: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel And Controls ... . . 185 Personal Settings (Customer Programmable Features) ......205 Instrument Cluster .
Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL Sales Code REQ — AM/FM Stereo Radio And Operation Instructions - CD Mode For CD And 6–Disc CD/DVD Changer (MP3/WMA AUX MP3 Audio Play ..... . 233 Jack) .
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 183 Clock Setting Procedure ....243 Reception Quality ..... 250 Universal Consumer Interface (UCI) —...
Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Air Conditioning And Heating System — Rear Climate Control — If Equipped ..267 If Equipped ......257 Operating Tips .
Page 185: Instrument Panel And Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 185 INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 5 — Upper Switch Bank 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Power Outlet/Cigar Lighter 10 — Climate Controls 3 — Radio 7 — Storage Bin 11 —...
Page 186: Instrument Cluster
186 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 187: Instrument Cluster Description
UNDERSTANDING YOUR INSTRUMENT PANEL 187 3. Turn Signal Indicator Light INSTRUMENT CLUSTER DESCRIPTION The arrow will flash with the exterior turn signal 1. Speedometer when the turn signal lever is operated. Indicates vehicle speed. If the vehicle electronics sense that the vehicle has 2.
Page 188 188 UNDERSTANDING YOUR INSTRUMENT PANEL engine start. If the bulb does not come on when turning during starting, stays on, or turns on while driving, have the key from OFF to ON, have the condition checked the system inspected by an authorized dealer as soon as promptly.
Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 189 8. Tachometer Do not operate the vehicle until the cause is corrected. The red segments indicate the maximum permissible This light does not show how much oil is in the engine. engine revolutions-per-minute (r.p.m. x 1000) for each The engine oil level must be checked under the hood.
Page 190 190 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Tire Pressure Monitoring Telltale Light reduces fuel efficiency and tire tread life, and may affect Each tire, including the spare (if provided), the vehicle’s handling and stopping ability. should be checked monthly when cold and Please note that the TPMS is not a substitute for proper inflated to the inflation pressure recommended tire maintenance, and it is the driver’s responsibility to...
Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 191 of reasons, including the installation of replacement or CAUTION! alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the The TPMS has been optimized for the original TPMS malfunction telltale after replacing one or more equipment tires and wheels.
Page 192 192 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- WARNING! ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to A hot engine cooling system is dangerous. You or exceed the upper limits of the normal operating range.
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 193 16. Electronic Stability Program (ESP) Warning 18. Seat Belt Reminder Light Light/Brake Assist System (BAS) Warning Light When the ignition switch is first turned ON, this The ESP/BAS warning light in the instrument light will turn on for 5 to 8 seconds as a bulb check. cluster comes on when the ignition switch is During the bulb check, if the driver’s seat belt is turned to the “ON”...
Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL U.S. federal regulations require that upon transfer of engine is running. Cycle the ignition key when the vehicle ownership, the seller certify to the purchaser the vehicle has completely stopped and the gear selector is correct mileage that the vehicle has been driven.
Page 195: Electronic Vehicle Information Center (Evic)
UNDERSTANDING YOUR INSTRUMENT PANEL 195 25. Voltage Warning Light ELECTRONIC VEHICLE INFORMATION CENTER This light monitors the electrical system voltage. (EVIC) The light should turn on momentarily as the engine is started. If the light stays on or turns on while driving, it indicates a problem with the charging system.
Page 196 196 UNDERSTANDING YOUR INSTRUMENT PANEL • Vehicle Information Warning Message Displays FUNCTION SELECT Button Press the FUNCTION SELECT button to select • Personal Settings (Customer Programmable Features) the displayed function (YES (Y) or NO (N). • Compass Display • Outside Temperature Display SCROLL Button •...
Page 197: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 197 • DRIVER/PASSENGER DOOR OPEN (with graphic) Electronic Vehicle Information Center (EVIC) Displays • LEFT/RIGHT REAR DOOR OPEN (with graphic) When the appropriate conditions exist, the Electronic • X DOORS OPEN (with graphic) Vehicle Information Center (EVIC) displays the following messages: •...
Page 198 198 UNDERSTANDING YOUR INSTRUMENT PANEL • HOOD/GATE/DOOR OPEN (with graphic) • SERVICE SUSPENSION • HOOD/GATE/DOORS OPEN (with graphic) • SERVICE PARK ASSIST SYSTEM • LIFTGLASS/DOOR OPEN (with graphic) • TRANSMISSION OVER TEMP • LIFTGLASS/DOORS OPEN (with graphic) • CHECK SHIFT PROCEDURE •...
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 199 • MEMORY #2 POSITIONS SET • LEFT REAR LOW PRESSURE (Premium TPM System Only) • MEMORY SYSTEM DISABLED — SEATBELT BUCK- LED (with graphic) • RIGHT REAR LOW PRESSURE (Premium TPM Sys- • MEMORY SYSTEM DISABLED — VEHICLE NOT IN tem Only) PARK •...
Page 200: Engine Oil Change Indicator System
200 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Oil Change Indicator System 2. Fully depress the accelerator pedal slowly three times within 10 seconds. Oil Change Required Your vehicle is equipped with an engine oil change 3. Turn the ignition switch to the OFF/LOCK position. indicator system.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 201 • Service Distance display above the average fuel economy in the EVIC display. This message will appear whenever MDS allows • Display Units of Measure in the engine to operate on four cylinders, which will vary Press the SCROLL button to cycle through all the Trip depending on driving habits and vehicle usage.
Page 202 202 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) This feature allows you to monitor when the MDS switches off the fuel on four of the eight cylinders and it Shows the estimated distance that can be traveled with can be used to modify driving habits in order to increase the fuel remaining in the tank.
Page 203: Compass Display
UNDERSTANDING YOUR INSTRUMENT PANEL 203 • Trip A button once to clear the resettable function being dis- Shows the total distance traveled for trip A since the last played. To reset all resettable functions, press and release reset. the FUNCTION SELECT button a second time within 3 seconds of resetting the currently displayed function •...
Page 204 204 UNDERSTANDING YOUR INSTRUMENT PANEL objects) until the “CAL” indicator displayed in the EVIC 5. Complete one or more 360° turns (in an area free from turns off. The compass will now function normally. large metal or metallic objects) until the “CAL” indicator turns off.
Page 205: Personal Settings (Customer Programmable Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 205 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4.
Page 206 206 UNDERSTANDING YOUR INSTRUMENT PANEL Use the SCROLL button to display one of the following mph (24 km/h). To make your selection, press and choices: release the FUNCTION SELECT button until “Y (YES)” or “N (NO)” appears. Language When in this display you may select one of three lan- Auto Unlock On Exit guages for all display nomenclature, including the trip When Y (YES) is selected, all of the doors will unlock...
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 207 unlock button. To make your selection, press and release Headlamp Off Delay the FUNCTION SELECT button until “Driver Door 1st When this feature is selected, the driver can choose to Press” or “All Doors 1st Press” appears. have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle.
Page 208 208 UNDERSTANDING YOUR INSTRUMENT PANEL Headlights On with Wipers (Available with Auto (NO)” appears. When N (NO) is selected, the system reverts to the standard intermittent wiper operation. Headlights Only) When Y (YES) is selected, and the headlight switch is in Easy Entry/Exit Seat (Available with Memory Seat the AUTO position, the headlights will turn on approxi- Only)
Page 209: System Status
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Key Off Power Delay Hill Start Assist When this feature is selected, the power window To make your selection, press and release the FUNC- switches, radio, hands–free system (if equipped), DVD TION SELECT button until “Y (YES)” or “N (NO)” video system (if equipped), power sunroof (if equipped), appears.
Page 210: Radio General Information
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Tire Pressure Monitor System (Shows the current NOTE: Tires heat up during normal driving conditions. pressure of all 4 road tires.) For additional information, Heat will cause the tire pressure to increase from 2 to 6 refer to “Tire Pressure Monitor System”...
Page 211: Two Types Of Signals
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Two Types of Signals FM Reception There are two basic types of radio signals... AM or Because FM transmission is based on frequency varia- Amplitude Modulation, in which the transmitted sound tions, interference that consists of amplitude variations causes the amplitude, or height, of the radio waves to can be filtered out, leaving the reception relatively clear, vary...
Page 212: Sales Code Req - Am/Fm Stereo Radio And
212 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO Operating Instructions - Radio Mode AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX NOTE: The ignition switch must be in the ON or ACC JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of your radio faceplate.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 213 will remain tuned to the new station until you make Phone Button (UConnect™ Hands Free Phone) — another selection. Holding either button will bypass If Equipped stations without stopping until you release it. Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped).
Page 214 214 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE RW/FF (Radio Mode) control knob to set the minutes. The minutes will begin to Pressing the rewind or fast forward button causes the blink. tuner to search for the next frequency in the direction of the arrows.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 215 Press the rotary TUNE control knob a third time and program format type to be selected. Many radio stations do TREBLE will display. Turn the TUNE control knob to the not currently broadcast Music Type information. right or left to increase or decrease the Treble tones.
Page 216 216 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type icon 16 Digit-Character Program Type is displayed, the radio will be tuned to the next frequency Display station with the same selected Music Type name. The Nostalgia Nostalga Music Type function only operates when in the FM...
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 217 • DVD Enter - When the disc is in DVD Menu mode, • Angle – Repeatedly Pressing SELECT will change selecting DVD Enter will allow you to play the current the viewing angle if supported by the DVD disc (If highlighted selection.
Page 218 218 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Home Clock - Pressing the SELECT button will Audio Language — If Equipped allow user to set the clock. Turn the TUNE control Selecting this item will allow the user to choose a default knob to adjust the hours and then press and turn the audio language (effective only if language supported by TUNE control knob to adjust the minutes.
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Audio DRC — If Equipped a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the Selecting this item will allow the user to limit maximum customer-preferred settings.
Page 220: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
220 UNDERSTANDING YOUR INSTRUMENT PANEL window. Each button can be set for SET 1 and SET 2 in Operation Instructions - (DISC MODE for CD and both AM and FM. This allows a total of 12 AM, 12 FM, MP3/WMA Audio Play, DVD-VIDEO) and 12 Satellite (if equipped) stations to be stored into The radio DVD player and many DVD discs are coded by push-button memory.
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 221 NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the eject button and the push-button with the corresponding number (1-6) where the CD LOAD Button —...
Page 222: Notes On Playing Mp3/Wma Files
222 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the Scan button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 223 • Maximum number of directory levels: 8 If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma • Maximum number of files: 255 tracks on that disc. •...
Page 224 224 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files MPEG Sampling Fre- Bit rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, 192, MPEG-1 Audio contains a lot of folders or files, the radio will take more 48, 44.1, 32...
Page 225: List Button
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Press and hold the INFO button again for 3 seconds to LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders return to elapsed time display. on the disc.
Page 226 226 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) Operating Instructions - Hands Free Phone No function. (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in EJECT Button (Auxiliary Mode) Section 3 of this manual. No function. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio”...
Page 227: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Macrovision This product incorporates copyright protection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Page 228 228 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) SCAN Button Press the ON/VOLUME control knob to turn on the Pressing the SCAN button causes the tuner to search for radio. Press the ON/VOLUME control knob a second the next listenable station in AM or FM frequencies, time to turn off the radio.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Phone Button (UConnect™ Hands Free Phone) — 3. After adjusting the hours, press the right side TUNE If Equipped control knob to set the minutes. The minutes will begin to Press this button to operate the Hand Free Phone (UCon- blink.
Page 230 230 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Press the rotary TUNE control knob a third time and Pressing the RW (Rewind) or FF (Fast Forward) buttons TREBLE will display. Turn the TUNE control knob to the causes the tuner to search for the next frequency in the right or left to increase or decrease the Treble tones.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 231 program format type to be selected. Many radio stations do 16 Digit-Character Program Type not currently broadcast Music Type information. Display Nostalgia Nostalga Toggle the Music Type button to select the following Oldies Oldies format types: Personality Persnlty 16 Digit-Character...
Page 232 232 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type icon AM and FM Buttons is displayed, the radio will be tuned to the next frequency Press the buttons to select AM or FM Modes. station with the same selected Music Type name. The SET Button —...
Page 233: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 233 stations to be stored into push-button memory. The NOTE: This Radio is capable of playing compact discs stations stored in SET 2 memory can be selected by (CD), recordable compact discs (CD-R), rewritable com- pressing the push-button twice. pact discs (CD-RW) compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
Page 234 234 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. •...
Page 235: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 235 TIME Button Press the right SEEK button to move to the next ran- Press this button to change the display from a large CD domly selected track. playing time display to a small CD playing time display. Press the RND button a second time to stop Random Play.
Page 236 236 UNDERSTANDING YOUR INSTRUMENT PANEL • Level 2: 31 (including a separator files properly and may be unable to play the file nor- and a mally. UDF and Apple HFS formats are not supported. 3-character extension) The radio uses the following limits for file systems: Multisession disc formats are supported by the radio.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 237 rates (VBR) are also supported. The majority of MP3 files Playback of MP3 Files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or When a medium containing MP3 data is loaded, the VBR bit rates.
Page 238: List Button (Cd Mode For Mp3 Play)
238 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Press and hold the INFO button again for 3 seconds to Pressing the LIST button will bring up a list of all folders return to elapsed time display. on the disc.
Page 239: Sales Code Ren - Multimedia System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 239 TIME Button (Auxiliary Mode) SALES CODE REN — MULTIMEDIA SYSTEM — IF Press this button to change the display to time of day. The EQUIPPED time of day will display for 5 seconds (when ignition is NOTE: The sales code is located on the lower right side off).
Page 240: Operating Instructions - Satellite Radio (If Equipped)
240 UNDERSTANDING YOUR INSTRUMENT PANEL to the car speakers while different audio tracks play Operating Instructions — Hands-Free through the system’s wireless headphones. This means Communication (UConnect™) (If Equipped) rear seat passengers can watch a DVD on the optional Refer to “Hands-Free Communication (UConnect™)” in rear-seat entertainment system while the driver and front Section 3 of this manual for detailed operating instruc- seat passenger listen to the radio.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 241 4. To move the minute forward, touch the screen where 3. When this feature is on, a check mark will appear in the word “Min” with the arrow pointing upward is the box next to the words “Daylight Savings.” Touch the displayed.
Page 242: Sales Code Rer - Am/Fm/Cd/Dvd Radio With Navigation System - If Equipped
242 UNDERSTANDING YOUR INSTRUMENT PANEL Changing the Time Zone SALES CODE RER — AM/FM/CD/DVD RADIO WITH NAVIGATION SYSTEM — IF EQUIPPED 1. Turn on the system. NOTE: The radio sales code is located on the lower right 2. Touch the screen where the time is displayed. The side of your radio faceplate.
Page 243: Operating Instructions - Satellite Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 243 4. Press the HOUR or MIN soft keys on the face of the Operating Instructions — Satellite Radio Refer to your “Navigation User’s Manual” for detailed radio. operating instructions. 5. The time setting will change each time you press the HOUR or MIN soft key.
Page 244: Universal Consumer Interface (Uci) - If Equipped
244 UNDERSTANDING YOUR INSTRUMENT PANEL Changing Daylight Savings Time This feature allows you to plug in an iPod into the vehicle’s sound system through a connector (UCI connec- 1. Press the Time soft key on the lower left side of the tor) using an optional connection cable (available face of the radio.
Page 245: Connecting The Ipod
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Connecting the iPod Play Mode Use the optional connection cable to connect an iPod to When switched to UCI mode the iPod will be in Play the vehicle’s UCI connector (which is located in the glove mode.
Page 246 246 UNDERSTANDING YOUR INSTRUMENT PANEL RW (Rewind) Button If the left (down) button is pressed during the first 2 Press and hold the “RW” button to move backward in the seconds of the current track, it will go back to the current track.
Page 247: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 247 SCAN Button List or Browse Mode Pressing the “SCAN” button will play the first 5 seconds During Play mode, pressing any of the following buttons of each track in the current list and then forward to the will take you to List mode.
Page 248 248 UNDERSTANDING YOUR INSTRUMENT PANEL During all List modes, the iPod will display all lists in After pressing a preset button, you will see the list you “wrap-around” mode. So if the track you wish to select is are in on the top line and the first item in that list on the at the bottom of the list, you just turn the “TUNE/ second line.
Page 249: Satellite Radio (Rsc) - If Equipped (Req And Res Radios Only)
UNDERSTANDING YOUR INSTRUMENT PANEL 249 further information, call the toll-free number 888-539- SATELLITE RADIO (RSC) — IF EQUIPPED (REQ AND RES RADIOS ONLY) 7474, or visit the Sirius web site at www.sirius.com. Satellite radio uses direct satellite to receiver broadcast- Please have the following information available when ing technology to provide clear digital sound, coast to calling:...
Page 250: Selecting Satellite Mode
250 UNDERSTANDING YOUR INSTRUMENT PANEL selected. Press the TUNE control knob and the Sirius ID Reception Quality number will display. The Sirius ID number display will Satellite reception may be interrupted due to one of the time out in 2 minutes. Press any button on the radio to following reasons: exit this screen.
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 251 SEEK Buttons 3 seconds will make the radio display the Song Title all of Press and release the SEEK buttons to search for the next the time (press and hold again to return to normal channel in Satellite mode.
Page 252 252 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type Select the button (1-6) you wish to lock onto this channel function is active, the radio will be tuned to the next and press and release that button. If a button is not channel with the same selected Music Type name.
Page 253: Operating Instructions - Hands Free Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Video Entertainment System (VES ) (If Equipped) Refer to separate “Video Entertainment System (VES ) Guide.”...
Page 254: Remote Sound System Controls - If Equipped
254 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. Remote Control Location...
Page 255: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 255 The right hand control is a rocker type switch with a Radio Operation push-button in the center and controls the volume and Pressing the top of the switch will “Seek” up for the next mode of the sound system. Pressing the top of the rocker listenable station and pressing the bottom of the switch switch will increase the volume and pressing the bottom will “Seek”...
Page 256: Cd/Dvd Disc Maintenance
256 UNDERSTANDING YOUR INSTRUMENT PANEL The center button on the left side rocker switch has no 5. Store the disc in its case after playing. function for a single disc CD player. However, when a 6. Do not expose the disc to direct sunlight. multiple disc CD player is equipped on the vehicle, the center button will select the next available CD in the 7.
Page 257: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 257 CLIMATE CONTROLS Manual Air Conditioning and Heating System — If Equipped The controls for the heating/air conditioning and venti- lation system in this vehicle consist of a series of rotary knobs. These comfort controls can be set to obtain desired interior conditions.
Page 258 258 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Mode Control The rotary knob on the left controls the The mode selector (the right rotary blower and can be set in one of four knob) can be placed in several posi- speeds and OFF. The blower fan mo- tions.
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 259 side window demister grilles. Some airflow is delivered Panel to the floor while in defrost so that comfort can be Air flows through the outlets located in the instru- maintained. ment panel. Air flows through the registers in the back of the center console to the rear seat passengers.
Page 260: Automatic Temperature Control - If Equipped
260 UNDERSTANDING YOUR INSTRUMENT PANEL located on the control panel. Conditioned air will be temperature of the driver and passenger. Based on the directed through the outlets selected by the mode control. sensor input, the system automatically adjusts the air A light in the snowflake button shows that the air flow temperature, the air flow volume, and amount of conditioning is on.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 261 NOTE: The numbers on the temperature dial represent You will experience the greatest efficiency by simply a comfort setting when the Mode knob is set to Auto, and allowing the system to function automatically. Selecting not the actual air temperature.
Page 262 262 UNDERSTANDING YOUR INSTRUMENT PANEL • Under certain conditions (after the vehicle is turned The system will automatically control recircu- lation. However, pressing this button will tem- off) the climate control system may recalibrate and a porarily put the system in recirculation mode. noise may be heard for 20 seconds.
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 263 Manual Operation NOTE: Please read the Automatic Temperature Control This system offers a full complement of manual override Operation Chart below for details. features which consist of Blower Preferred Automatic, Mode Preferred Automatic with Manual Air Temperature Control and Manual.
Page 264 264 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 265 NOTE: Regardless of the type of operation, when a NOTE: The defrost mode is not automatically selected. temperature knob is set to the full clockwise or full It must be manually selected, when desired. counterclockwise position, the system will deliver full •...
Page 266 266 UNDERSTANDING YOUR INSTRUMENT PANEL Air flows through the registers in the back of the This button can be used to block out smoke, center console, and under the front seats to the rear odors, dust, high humidity, or if rapid cooling seat passengers.
Page 267: Manual Air Conditioning And Heating System - Rear Climate Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Rear Climate Control — If Equipped The Manual Rear Climate Control system has one floor air outlet (passenger side), and two panel outlets in the rear quarter trim (on each side). The unit provides warm or cool air through the floor and upper outlets.
Page 268 268 UNDERSTANDING YOUR INSTRUMENT PANEL The rear temperature, blower speed, and mode control can Rear Blower Control be adjusted as desired by the third row seat occupants. The left knob on the Rear Control Panel has four posi- tions, “Off”, and a range of three blower speeds. This allows the third row seat occupants to control the volume of air circulated in the rear of the vehicle.
Page 269: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 269 • Panel Rear Temperature Control The center knob on the Rear Control Panel allows the Air flows through the outlets located in the rear third row seat occupants to have control of the rear quarter trim panels. These registers can be closed temperature as follows: to block airflow.
Page 270 270 UNDERSTANDING YOUR INSTRUMENT PANEL Regular cleaning of the inside of the windows with a N (Neutral) and depress the accelerator slightly for fast non-filming cleaning solution (vinegar and water works idle operation to increase coolant flow and fan speed. very well) will help prevent contaminates (cigarette Your air conditioning system is also equipped with an smoke, perfumes, etc.) from sticking to the windows.
Page 271: Operating Tips Chart
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Operating Tips Chart...
Page 273: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ..... 277 Brake/Transmission Interlock System ..283 Normal Starting ..... . 278 5–Speed Automatic Transmission .
Page 274 274 STARTING AND OPERATING Shifting Procedures ....293 Power Steering ......305 Quadra-Drive II System —...
Page 275 STARTING AND OPERATING 275 Tread Wear Indicators ....319 Reformulated Gasoline ....334 Life Of Tire .
Page 276 276 STARTING AND OPERATING Cruising Range ..... . . 340 Trailer And Tongue Weight ....352 Replacement Parts .
Page 277: Starting Procedures
STARTING AND OPERATING 277 STARTING PROCEDURES WARNING! Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if • Never leave children alone in a vehicle. Leaving present, instruct all other occupants to buckle their seat children in a vehicle unattended is dangerous for a belts.
Page 278: Normal Starting
278 STARTING AND OPERATING Normal Starting Extremely Cold Weather (below 20°F or 29°C) The gear selector must be in the “N” (Neutral) or “P” To insure reliable starting at these temperatures, use of an (Park) position before you can start the engine. Apply the externally powered electric engine block heater (available brakes before shifting into any driving gear.
Page 279: If Engine Fails To Start
STARTING AND OPERATING 279 If the engine fails to start after you have followed the If Engine Fails to Start “Normal Starting” or “Extreme Cold Weather” proce- WARNING! dures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. •...
Page 280: After Starting
280 STARTING AND OPERATING After Starting The engine block heater cord is located: The idle speed is controlled automatically and it will • 3.7L/4.7L Engine — coiled and strapped to the engine decrease as the engine warms up. oil dipstick tube. ENGINE BLOCK HEATER —...
Page 281: Automatic Transmission
STARTING AND OPERATING 281 AUTOMATIC TRANSMISSION WARNING! CAUTION! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher Damage to the transmission may occur if the follow- than idle speed. If your foot is not firmly on the ing precautions are not observed: brake pedal, the vehicle could accelerate quickly •...
Page 282 282 STARTING AND OPERATING 1. Firmly set the parking brake. 2. Using a flat blade screwdriver, carefully remove the shift lock manual override cover which is located on the PRNDL bezel. 3. Depress and maintain firm pressure on the brake pedal.
Page 283: Brake/Transmission Interlock System
STARTING AND OPERATING 283 Brake/Transmission Interlock System Gear Ranges This system prevents you from moving the gear shift out NOTE: After selecting any gear range, wait a moment to of P (Park) and into any gear unless the brake pedal is allow the selected gear to engage before accelerating.
Page 284 284 STARTING AND OPERATING R (Reverse) WARNING! Use this range only after the vehicle has come to a complete stop. Never use P (Park) position as a substitute for the parking brake. Always apply parking brake fully N (Neutral) when parked to guard against vehicle movement and Shift into N (Neutral) when the vehicle is standing for prolonged periods with the engine running.
Page 285 STARTING AND OPERATING 285 Electronic Range Select (ERS)Operation through-gear accelerations. This additional gear im- The Electronic Range Select (ERS) shift control allows proves vehicle performance and cooling capability when you to move the shifter left (-) or right (+) when the towing a trailer on certain grades.
Page 286 286 STARTING AND OPERATING • transmission has reached normal operating tempera- NOTE: To select the proper gear position for maximum deceleration (engine braking), move the shift lever to the ture. left “D(-)” and hold it there. The transmission will shift to NOTE: If the vehicle is started in extremely cold tem- the range from which the vehicle can best be slowed peratures, the transmission may not shift into Overdrive...
Page 287 STARTING AND OPERATING 287 OVER TEMP” message may display and the transmis- overheating or failure due to excessive shifting. When sion may downshift out of Overdrive until the transmis- operating in “TOW/HAUL” mode, the transmission will sion cools down. After cool down, the transmission will shift to direct gear and Overdrive will be enabled under resume normal operation.
Page 288 288 STARTING AND OPERATING activated. Pressing the switch a second time restores 4. Wait approximately 10 seconds, then restart the en- normal operation. If the “TOW/HAUL” mode is desired, gine. the switch must be pressed each time the engine is 5.
Page 289: Rocking The Vehicle
STARTING AND OPERATING 289 drops below a calibrated speed, or during acceleration, cause damage to the transmission. The torque converter the clutch automatically and smoothly disengages. The will refill within five seconds of shifting from Park into feature is operational in Overdrive and in Drive. any other gear position.
Page 290: Four-Wheel Drive Operation
290 STARTING AND OPERATING selector in N (Neutral) for at least one minute after every FOUR-WHEEL DRIVE OPERATION five rocking-motion cycles. This will minimize overheat- Quadra-Trac I Operating ing and reduce the risk of transmission failure during Instructions/Precautions — If Equipped prolonged efforts to free a stuck vehicle.
Page 291: Quadra-Trac Ii Operating Instructions/Precautions - If Equipped
STARTING AND OPERATING 291 road surfaces only. Driving in the 4 LOW position on dry Quadra-Trac II Operating Instructions/Precautions — If Equipped hard surfaced roads may cause increased tire wear and The Quadra-Trac II transfer case is fully automatic in the damage to driveline components.
Page 292: Shift Positions
292 STARTING AND OPERATING 4 HI WARNING! Four Wheel Drive High Range — All roads surfaces such as ice, snow, gravel, sand, and dry hard pavement. You or others could be injured if you leave the vehicle unattended with the transfer case in the N N (Neutral) (Neutral) position without first fully engaging the Neutral —...
Page 293: Shifting Procedures
STARTING AND OPERATING 293 Shifting Procedures 4 HI to 4 LOW With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into N (Neutral), and raise the transfer case T-handle. “The 4WD LOW Indicator Lamp”...
Page 294 294 STARTING AND OPERATING LOW Indicator Lamp” in the instrument cluster will flash Neutral (N) Shift Procedure and go out when the shift is complete. Release the 1. Key ON, engine off. T-handle. 2. Vehicle stopped, with foot on brake. NOTE: If shift conditions/interlocks are not met, or a transfer case motor temperature protection condition 3.
Page 295: Quadra-Drive Ii System - If Equipped
STARTING AND OPERATING 295 Quadra-Drive II System — If Equipped The optional Quadra-Drive II System features three torque transfer couplings. The couplings include ELSD (Electronic Limited Slip Differential) front and rear axles and Quadra-Trac II transfer case. The optional ELSD axles are fully automatic and require no driver input to operate.
Page 296: On-Road Driving Tips
296 STARTING AND OPERATING ON-ROAD DRIVING TIPS OFF-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a NOTE: Prior to off-road driving, remove the front air narrower track to make them capable of performing in a dam to prevent damage. The front air dam is attached to wide variety of off-road applications.
Page 297 STARTING AND OPERATING 297 and/or the flow rate is reduced. If you must cross CAUTION! flowing water avoid depths in excess of 9 inches. The flowing water can erode the streambed causing your When driving through water, do not exceed 5 mph (8 vehicle to sink into deeper water.
Page 298: Driving In Snow, Mud And Sand
298 STARTING AND OPERATING Driving In Snow, Mud and Sand If you stall or begin to lose forward motion while In heavy snow, when pulling a load, or for additional climbing a steep hill, allow your vehicle to come to a stop control at slower speeds, shift the transmission to a low and immediately apply the brakes.
Page 299: Traction Downhill
STARTING AND OPERATING 299 Remember, never drive diagonally across a hill-always After Driving Off-Road drive straight up or down. Off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road it is If the wheels start to slip as you approach the crest of a always a good idea to check for damage.
Page 300: Parking Brake
300 STARTING AND OPERATING • After extended operation in mud, sand, water, or PARKING BRAKE similar dirty conditions, have brake rotors, wheels, To set the parking brake, pull the lever up as firmly as brake linings, and axle yokes inspected and cleaned as possible.
Page 301 STARTING AND OPERATING 301 WARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury. Also, be certain to leave the transmission in P (Park). Failure to do so may allow the vehicle to roll and cause damage or injury.
Page 302: Anti-Lock Brake System
302 STARTING AND OPERATING When parking on a hill, turn the front wheels toward the WARNING! curb on a downhill grade and away from the curb on an uphill grade. Significant over or under inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss The parking brake should always be applied whenever of braking effectiveness.
Page 303 STARTING AND OPERATING 303 WARNING! WARNING! • The Anti-Lock Brake System (ABS) cannot prevent Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping the natural laws of physics from acting on the makes the stopping distance longer. Just press firmly vehicle, nor can it increase braking or steering on your brake pedal when you need to slow down or efficiency beyond that afforded by the condition...
Page 304 304 STARTING AND OPERATING • Do not “ride” the brakes by resting your foot on the CAUTION! pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- The Anti-Lock Brake System is subject to possible tances, or brake damage.
Page 305: Power Steering
STARTING AND OPERATING 305 build up between the tire tread and the road. This NOTE: Increased noise levels at the end of the steering hydroplaning action can cause loss of traction, braking wheel travel are considered normal and do not indicate ability, and control.
Page 306: Multi Displacement System (Mds) - 5.7L Engine
306 STARTING AND OPERATING TIRE SAFETY INFORMATION CAUTION! Tire Markings Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur.
Page 307 STARTING AND OPERATING 307 • European Metric tire sizing is based on European • Temporary Spare tires are high-pressure compact design standards. Tires designed to this standard have spares designed for temporary emergency use only. the tire size molded into the sidewall beginning with Tires designed to this standard have the letter “T”...
Page 308 308 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
Page 309 STARTING AND OPERATING 309 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Page 310: Tire Identification Number (Tin)
310 STARTING AND OPERATING Tire Identification Number (TIN) located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted The TIN may be found on one or both sides of the tire; on the vehicle.
Page 311: Tire Loading And Tire Pressure
STARTING AND OPERATING 311 Tire and Loading Information Placard Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire and Loading Information This placard tells you important information about the: 1) number of people that can be carried in the vehicle...
Page 312 312 STARTING AND OPERATING Loading combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 313 STARTING AND OPERATING 313 5. Determine the combined weight of luggage and cargo NOTE: The following table shows examples on how to being loaded on the vehicle. That weight may not safely calculate total load, cargo/luggage, and towing capaci- exceed the available cargo and luggage load capacity ties of your vehicle with varying seating configurations calculated in Step 4.
Page 314 314 STARTING AND OPERATING...
Page 315: Tires - General Information
STARTING AND OPERATING 315 1. Safety— WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can cause increase your stopping distance. Use tires of the accidents.
Page 316: Tire Inflation Pressures
316 STARTING AND OPERATING 2. Economy— Tire Inflation Pressures Improper inflation pressures can cause uneven wear The proper cold tire inflation pressure is listed on either patterns to develop across the tire tread. These abnormal the face of the driver’s door or the driver’s side “B” pillar. wear patterns will reduce tread life resulting in a need for earlier tire replacement.
Page 317 STARTING AND OPERATING 317 check tire pressure. Do not make a visual judgement Check tire pressures more often if subject to a wide range when determining proper inflation. Radial tires may look of outdoor temperatures, as tire pressures vary with properly inflated even when they are under inflated.
Page 318: Tire Pressures For High Speed Operation
318 STARTING AND OPERATING Tire Pressures for High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 319: Tread Wear Indicators
STARTING AND OPERATING 319 WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Page 320: Life Of Tire
320 STARTING AND OPERATING Life of Tire Keep dismounted tires in a cool, dry place with as little The service life of a tire is dependent upon varying exposure to light as possible. Protect tires from contact factors including but not limited to: with oil, grease, and gasoline.
Page 321: Alignment And Balance
STARTING AND OPERATING 321 WARNING! CAUTION! • Do not use a tire, wheel size or rating other than Replacing original tires with tires of a different size that specified for your vehicle. Some combina- may result in false speedometer and odometer tions of unapproved tires and wheels may change readings.
Page 322: Tire Chains
322 STARTING AND OPERATING • Use SAE class “S” tire chains or traction devices only. Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-of- • Follow tire chain manufacturer’s instructions for balance. Proper balancing will reduce vibration and mounting chains.
Page 323: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 323 aggressive tread designs such as those on On/Off Road type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules”...
Page 324 324 STARTING AND OPERATING decrease. Tire pressure should always be set based on increased to the recommended cold tire pressure in order cold inflation tire pressure. This is defined as the tire for the “Tire Pressure Monitoring Telltale Light” to be pressure after the vehicle has not been driven for at least turned off.
Page 325 STARTING AND OPERATING 325 Telltale Light” will turn OFF only after the tires have been CAUTION! inflated to the vehicle’s recommended cold tire pressure value. After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent mois- CAUTION! ture and dirt from entering the valve stem, which could damage the Tire Pressure Monitoring Sensor.
Page 326: Base System - If Equipped
326 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- The Tire Pressure Monitor System (TPMS) consists of the nance, and it is the driver’s responsibility to maintain following components: correct tire pressure using an accurate tire gauge, even •...
Page 327 STARTING AND OPERATING 327 inflation pressure of each tire on your vehicle, and inflate 1. Jamming due to electronic devices or driving next to each tire to the vehicle’s recommended cold placard facilities emitting the same Radio Frequencies as the TPM pressure value.
Page 328: Premium System - If Equipped
328 STARTING AND OPERATING 10 minutes above 15 mph (24 km/h) will turn OFF the and reinstall it on the vehicle in place of the spare tire, the “Tire Pressure Monitoring Telltale Light” as long as none TPMS will update automatically and the “Tire Pressure of the road tires are below the low pressure warning Monitoring Telltale Light”...
Page 329 STARTING AND OPERATING 329 The Tire Pressure Monitor System (TPMS) consists of the tires. A low spare tire will set the “SPARE LOW PRES- following components: SURE” textual message, but it will not cause the “Tire Pressure Monitoring Telltale Light” to illuminate or the •...
Page 330 330 STARTING AND OPERATING NOTE: Your system can be set to display pressure units The system will automatically update, the graphic dis- in PSI, kPa, or BAR. play of the pressure value(s) will stop flashing, and the “Tire Pressure Monitoring Telltale Light” will extinguish once the updated tire pressure(s) have been received.
Page 331 STARTING AND OPERATING 331 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings.
Page 332 332 STARTING AND OPERATING in the EVIC, and the graphic display will still show the minutes above 15 mph (24 km/h), the “Tire Pressure low tire pressure value flashing. Driving the vehicle for Monitoring Telltale Light” will flash on and off for 75 up to 10 minutes above 15 mph (24 km/h) will turn OFF seconds and then remain on solid.
Page 333: General Information
STARTING AND OPERATING 333 be driven for up to 10 minutes above 15 mph (24 km/h) FUEL REQUIREMENTS in order for the TPMS to receive this information. 3.7/4.7L Engines (If Equipped) General Information All engines (except 5.7L engines) are de- This device complies with part 15 of the FCC rules and signed to meet all emissions regulations RSS 210 of Industry Canada.
Page 334: Reformulated Gasoline
334 STARTING AND OPERATING using high quality unleaded gasoline having an octane Over 40 auto manufacturer’s world wide have issued and range of 87 to 89. The manufacturer recommends the use endorsed consistent gasoline specifications (the World- of 89 octane for optimum performance. The use of wide Fuel Charter, WWFC) to define fuel properties premium gasoline is not recommended.
Page 335: Gasoline/Oxygenate Blends
STARTING AND OPERATING 335 Gasoline/Oxygenate Blends MMT In Gasoline Some fuel suppliers blend unleaded gasoline with oxy- MMT is a manganese containing metallic additive that is genates such as 10% ethanol, MTBE, and ETBE. Oxygen- blended into some gasoline to increase octane. Gasoline ates are required in some areas of the country during the blended with MMT provides no performance advantage winter months to reduce carbon monoxide emissions.
Page 336: Materials Added To Fuel
336 STARTING AND OPERATING • An out-of-tune engine, or certain fuel or ignition Materials Added To Fuel All gasoline sold in the United States is required to malfunctions, can cause the catalytic converter to contain effective detergent additives. Use of additional overheat.
Page 337: Carbon Monoxide Warnings
STARTING AND OPERATING 337 the vehicle is raised. Have any abnormal conditions Carbon Monoxide Warnings repaired promptly. Until repaired, drive with all side WARNING! windows fully open. • Keep the liftgate closed when driving your vehicle to Carbon monoxide (CO) in exhaust gases is deadly. prevent carbon monoxide and other poisonous ex- Follow the precautions below to prevent carbon haust gases from entering the vehicle.
Page 338: Ethanol Fuel (E-85)
338 STARTING AND OPERATING E-85 Fuel Cap E-85 Badge ETHANOL FUEL (E-85) CAUTION! E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Only vehicles with the E-85 fuel filler cap (gas cap) can operate on E-85.
Page 339: Fuel Requirements
STARTING AND OPERATING 339 • you do not switch when the fuel gauge indicates less WARNING! than 1/4 full • you do not add less than 5 gallons when refueling Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- •...
Page 340: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
340 STARTING AND OPERATING Selection Of Engine Oil For Flexible Fuel Vehicles Cruising Range Because E-85 fuel contains less energy per gallon than (E-85) and Gasoline Vehicles Whether operating the vehicle on an E-85 ethanol fuel or gasoline, you will experience an increase in fuel con- unleaded gasoline the engine oil requirements are the sumption.
Page 341: Adding Fuel
STARTING AND OPERATING 341 CAUTION! • Replacing fuel system components with non- ethanol compatible components can damage your vehicle. • Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold start- ing and may affect drivability. ADDING FUEL Fuel Filler Cap Location Fuel Filler Cap (Gas Cap)
Page 342 342 STARTING AND OPERATING CAUTION! CAUTION! Damage to the fuel system or emission control sys- To avoid fuel spillage and overfilling, do not “top tem could result from using an improper fuel cap off” the fuel tank after filling. (gas cap). A poorly fitting cap could let impurities into the fuel system.
Page 343 STARTING AND OPERATING 343 NOTE: Tighten the gas cap about 1/4 turn until you WARNING! hear one click. This is an indication that cap is properly tightened. A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You If the gas cap is not tighten properly, the Malfunction could be burned.
Page 344: Vehicle Loading
344 STARTING AND OPERATING Hour of manufacture. The bar code that appears on the WARNING! bottom of the label is your Vehicle Identification Number (VIN). • Never add fuel when the engine is running. • Never have any smoking materials lit in or near Gross Vehicle Weight Rating (GVWR) The GVWR is the total permissible weight of your vehicle the vehicle when the fuel cap is removed or the...
Page 345 STARTING AND OPERATING 345 Each axle GAWR is determined by the components in the Curb Weight system with the lowest load carrying capacity (axle, The curb weight of a vehicle is defined as the total weight springs, tires, or wheels). Heavier axles or suspension of the vehicle with all fluids, including vehicle fuel, at full components sometimes specified by purchasers for in- capacity conditions, and with no occupants or cargo...
Page 346: Trailer Towing
346 STARTING AND OPERATING or rear axles has been exceeded but the total load is TRAILER TOWING within the specified GVWR. If so, weight must be shifted In this section you will find safety tips and information from front to rear or rear to front as appropriate until the on limits to the type of towing you can reasonably do specified weight limitations are met.
Page 347 STARTING AND OPERATING 347 Gross Trailer Weight (GTW) Gross Axle Weight Rating (GAWR) The gross trailer weight (GTW) is the weight of the trailer The GAWR is the maximum capacity of the front and rear plus the weight of all cargo, consumables and equipment axles.
Page 348 348 STARTING AND OPERATING Frontal Area safety. The addition of a friction/hydraulic sway control The maximum height and maximum width of the front of also dampens sway caused by traffic and crosswinds and a trailer. contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load Weight-Carrying Hitch equalizing) hitch are recommended for heavier Tongue...
Page 349 STARTING AND OPERATING 349 Weight Distributing Hitch System Improper Adjustment of Weight Distributing System...
Page 350: Trailer Hitch Classification
350 STARTING AND OPERATING Trailer Hitch Classification Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of Class Max. GTW trailers weighing over 3,500 lbs (1 587 kg) with the (Gross Trailer Wt.) optional Trailer Tow Prep Package. See your dealer for Class I - Light Duty 2,000 lbs (907 kg) package content.
Page 351 STARTING AND OPERATING 351 Engine/ Model GCWR (Gross Com- Frontal Area Max. GTW (Gross Max. Tongue Wt. Transmission bined Wt. Rating) Trailer Wt.) (See Note 1) 3.7L/ 8,670 lbs (3 933 kg) 40 Sq. Ft (3.72 3,500 lbs (1 587 kg) 350 lbs (159 kg) Automatic square meters)
Page 352: Trailer And Tongue Weight
352 STARTING AND OPERATING Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 353: Towing Requirements
STARTING AND OPERATING 353 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, • Avoid towing a trailer for the first 500 miles (805 must be considered as part of the total load on your km) of vehicle operation.
Page 354 354 STARTING AND OPERATING • Safety chains must always be used between your WARNING! vehicle and trailer. Always connect the chains to the hook retainers of the vehicle hitch. Cross the chains Improper towing can lead to an injury accident. under the trailer tongue and allow enough slack for Follow these guidelines to make your trailer towing turning corners.
Page 355 STARTING AND OPERATING 355 3. GAWR − Check for signs of tire wear or visible tire damage before towing a trailer. Refer to the “Tires–General 4. Tongue weight rating for the trailer hitch utilized Information” section of this manual for the proper (This requirement may limit the ability to always inspection procedure.
Page 356 356 STARTING AND OPERATING actuated brakes. When towing a trailer equipped with WARNING! a hydraulic surge actuated brake system, an electronic brake controller is not required. Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- −...
Page 357: Towing Tips
STARTING AND OPERATING 357 The Trailer Tow Package may include a 4 and 7 pin wiring harness. Use a factory approved trailer harness and connector. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
Page 358 358 STARTING AND OPERATING Towing Tips — Automatic Transmission Towing Tips — Electronic Speed Control (If The “D” range can be selected when towing. However, if Equipped) frequent shifting occurs while in this range, the ”Tow/ − Don’t use in hilly terrain or with heavy loads. Haul”...
Page 359: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 359 − Air Conditioning Towing — Quadra-Trac I (Single-Speed Transfer Turn off temporarily. Case) 4WD Models − refer to Cooling System Operating information in the Recreational towing is not allowed. This model does not Maintenance section of this manual for more informa- have a N (Neutral) position in the transfer case.
Page 360 360 STARTING AND OPERATING Shifting Into Neutral (N) on solid) when Neutral shift is complete. A “4WD Use the following procedure to prepare your vehicle for SYSTEM IN NEUTRAL” message will display on the recreational towing. EVIC (Electronic Vehicle Information Center). Refer to “Electronic Vehicle Information Center (EVIC)”...
Page 361 STARTING AND OPERATING 361 5. Start engine. CAUTION! 6. Shift transmission into D (Drive). Transmission damage may occur if the transmission 7. Release brake pedal and ensure that there is no vehicle is shifted into P (Park) with the transfer case in N movement.
Page 362 362 STARTING AND OPERATING Hold down N (Neutral) “pin” switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in progress. Lamp will stop blinking (go out) when shift is complete. The “4WD SYSTEM IN NEUTRAL”...
Page 363: Snow Plow
STARTING AND OPERATING 363 NOTE: When shifting out of transfer case N (Neutral), CAUTION! turning the engine OFF may be required to avoid gear clash. Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. WARNING! You or others could be injured if you leave the SNOW PLOW...
Page 364 364 STARTING AND OPERATING...
Page 365: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....366 Jacking Instructions ....371 If Your Engine Overheats .
Page 366: Hazard Warning Flashers
366 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS Your vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently. Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle.
Page 367: If Your Engine Overheats
WHAT TO DO IN EMERGENCIES 367 IF YOUR ENGINE OVERHEATS CAUTION! In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- Driving with a hot cooling system could damage tion. your vehicle. If the temperature gauge reads “H”, •...
Page 368: Jacking And Tire Changing
368 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING Jack Location The scissor-type jack and tire changing tools are located WARNING! in a compartment behind the third row seat. Refer to “Cargo Area Features” in Section 3 of this manual. •...
Page 369: Spare Tire Stowage
WHAT TO DO IN EMERGENCIES 369 Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. To remove or stow the spare, use the jack handle to rotate the “spare tire drive”...
Page 370: Preparations For Jacking
370 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! The winch mechanism is designed for use with the Do not attempt to change a tire on the side of the jack extension tube only. Use of an air wrench or vehicle close to moving traffic. Pull far enough off other power tools is not recommended and can dam- the road to avoid being hit when operating the jack age the winch.
Page 371: Jacking Instructions
WHAT TO DO IN EMERGENCIES 371 Jacking Instructions 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground.
Page 372 372 WHAT TO DO IN EMERGENCIES 4. Locate the jack as shown. For the front axle, place it under the front lower control arm as shown. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle.
Page 373 WHAT TO DO IN EMERGENCIES 373 9. Finish tightening the lug nuts. Push down on the WARNING! wrench while tightening for increased leverage. Alternate nuts until each nut has been tightened twice. Correct Raising the vehicle higher than necessary can make wheel nut tightness is 130 N·m (95 ft.
Page 374: Jump Starting
374 WHAT TO DO IN EMERGENCIES NOTE: Tire should be stowed with the “beauty” side JUMP STARTING up. Storing the tire upside down may result in scratching If the vehicle has a discharged battery, booster cables may or damage to the wheel face. Continue winching up the be used to obtain a start from a booster battery or the tire until you hear the winch “ratchet”...
Page 375 WHAT TO DO IN EMERGENCIES 375 2. Park the booster vehicle within cable reach but with- WARNING! out letting the vehicles touch. Set the parking brake on both vehicles, place the transmission in P (Park), and turn Battery fluid is a corrosive acid solution; do not allow the ignition OFF.
Page 376 376 WHAT TO DO IN EMERGENCIES 5. Connect the other cable, first to the negative terminal WARNING! of the booster battery and then to the engine of the vehicle with the discharged battery. Make sure you have Any procedure other than above could result in: a good contact on the engine.
Page 377: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 377 EMERGENCY TOW HOOKS — IF EQUIPPED WARNING! If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the • You should not try to start your vehicle by pushing vehicle.
Page 378: Towing A Disabled Vehicle
378 WHAT TO DO IN EMERGENCIES (24 km) can cause severe transmission damage. If the WARNING! transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 Stand clear of vehicles when pulling with tow hooks. miles (24 km), remove the driveshaft or tow with all four Tow straps and chains may break, causing serious wheels OFF the ground.
Page 379: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment – 3.7L ....382 Maintenance Procedures ....389 Engine Compartment –...
Page 380 380 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance ... . . 397 Maintenance After Off-Road Driving ..414 Power Steering Fluid Check ....398 Appearance Care And Protection From Corrosion .
Page 381 MAINTAINING YOUR VEHICLE 381 Front Fog Light ..... . 431 Fluids, Lubricants, And Genuine Parts ..436 Rear Tail, Stop, Turn Signal, And Back-Up Engine .
Page 382: Engine Compartment - 3.7L
382 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 3.7L...
Page 383: Engine Compartment - 4.7L
MAINTAINING YOUR VEHICLE 383 ENGINE COMPARTMENT – 4.7L...
Page 384: Engine Compartment - 5.7L
384 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 5.7L...
Page 385: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 385 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors • Prolonged driving with the “Malfunction Indica- the performance of the emissions, engine, and automatic tor Light”...
Page 386: Loose Fuel Filler Cap Message
386 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message outside temperatures. If the test is performed and the After fuel is added, the vehicle diagnostic system can problem is gone, the message will disappear. determine if the fuel filler cap is loose, improperly If the problem persists, the message will appear the next installed, or damaged.
Page 387 MAINTAINING YOUR VEHICLE 387 is functioning and is not on when the engine is running, 4. As soon as you turn your key to the ON position, you and that the OBD (On Board Diagnostic) system is ready will see your MIL symbol come on as part of a normal for testing.
Page 388: Replacement Parts
388 MAINTAINING YOUR VEHICLE you may need to do nothing more than drive your DEALER SERVICE vehicle as you normally would in order for your OBD Your dealer has the qualified service personnel, special system to update. A recheck with the above test routine tools and equipment to perform all service operations in may then indicate that the system is now ready.
Page 389: Maintenance Procedures
MAINTAINING YOUR VEHICLE 389 These items should be inspected if a malfunction is WARNING! observed or suspected. You can be badly injured working on or around a Engine Oil motor vehicle. Do only that service work for which Checking Oil Level you have the knowledge and the proper equipment.
Page 390 390 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil CAUTION! Identification Symbol This symbol means that the oil has Overfilling or underfilling the crankcase will cause been certified by the American aeration or loss of oil pressure. This could damage Petroleum Institute (API).
Page 391 MAINTAINING YOUR VEHICLE 391 NOTE: Vehicles equipped with a 5.7L engine must use engine oil. Engine oil is an engineered product and it’s SAE 5W-20 oil. Failure to do so may result in improper performance may be impaired by supplemental addi- operation of the Multiple Displacement System (MDS).
Page 392: Drive Belts - Check Condition And Tension
392 MAINTAINING YOUR VEHICLE Engine Oil Filter Selection of damage which could result in belt failure. Low gen- All of the manufacturer’s engines have a full-flow type erator belt tension can cause battery failure. disposable oil filter. Use a filter of this type for replace- Also, check belt routing to make sure there is no inter- ment.
Page 393: Engine Air Cleaner Filter
MAINTAINING YOUR VEHICLE 393 Engine Air Cleaner Filter Catalytic Converter Refer to the Maintenance Schedule for recommended The catalytic converter requires the use of unleaded fuel Engine Air Cleaner Filter change intervals. only. Leaded gasoline will destroy the effectiveness of the converter as an emission control device.
Page 394 394 MAINTAINING YOUR VEHICLE CAUTION! WARNING! Damage to the catalytic converter can result if your A hot exhaust system can start a fire if you park over vehicle is not kept in proper operating condition. In materials that can burn. Such materials might be the event of engine malfunction, particularly involv- grass or leaves coming into contact with your exhaust ing engine misfire or other apparent loss of perfor-...
Page 395: Crankcase Emission Control System
MAINTAINING YOUR VEHICLE 395 To minimize the possibility of catalytic converter dam- Crankcase Emission Control System age: Proper operation of this system depends on freedom from sticking or plugging due to deposits. As vehicle • Do not shut off the engine or interrupt the ignition mileage builds up, the PCV valve and passages may when the transmission is in gear and the vehicle is in accumulate deposits.
Page 396 396 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Don’t allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin or clothing.
Page 397: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 397 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer • Use only refrigerants and compressor lubricants at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
Page 398: Power Steering Fluid Check
398 MAINTAINING YOUR VEHICLE NOTE: Use only manufacturer approved A/C System CAUTION! Sealers, Stop Leak Products, Seal Conditioners, Compres- sor Oil, and Refrigerants. Do not use Automatic Transmission Fluid (ATF) or other types of power steering fluids when servicing Refrigerant Recovery and Recycling the power steering system of this vehicle.
Page 399: Body Lubrication
MAINTAINING YOUR VEHICLE 399 Body Lubrication WARNING! Locks and all body pivot points, including such items as seat tracks, doors, tailgate and hood hinges, should be Fluid level should be checked on a level surface with lubricated periodically to assure quiet, easy operation the engine off to prevent injury from moving parts, and to protect against rust and wear.
Page 400: Windshield Wiper Blades
400 MAINTAINING YOUR VEHICLE Windshield Wiper Blades The fluid reservoir for the windshield washers and the The rubber edges of the wiper blades and the windshield rear window washer is shared. The fluid reservoir is should be cleaned periodically with a sponge or soft cloth located in the engine compartment, be sure to check the and a mild nonabrasive cleaner to remove accumulations fluid level at regular intervals.
Page 401: Exhaust System
MAINTAINING YOUR VEHICLE 401 into the passenger compartment. In addition, inspect the WARNING! exhaust system each time the vehicle is raised for lubri- cation or oil change. Replace as required. Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care Cooling System must be exercised when filling or working around the washer solution.
Page 402 402 MAINTAINING YOUR VEHICLE system should be drained, flushed and refilled with fresh Cooling System — Drain, Flush, And Refill antifreeze/coolant. Check the front of the A/C condenser At the intervals shown on the Maintenance Schedule, the for any accumulation of bugs, leaves, etc. If dirty, clean by system should be drained, flushed and refilled.
Page 403 MAINTAINING YOUR VEHICLE 403 Adding Coolant CAUTION! Your vehicle has been built with an improved antifreeze/ coolant that allows extended maintenance intervals. This Mixing of antifreeze/coolant other than the specified antifreeze/coolant can be used up to 5 Years or 100,000 HOAT antifreeze/coolant may result in decreased miles (160 000 km) before replacement.
Page 404 404 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- The cap should be inspected and cleaned if there is any ized water when mixing the water/antifreeze (cool- accumulation of foreign material on the sealing surfaces. ant) solution.
Page 405 MAINTAINING YOUR VEHICLE 405 Disposal of Used Engine Coolant The radiator normally remains completely full, so there is Used ethylene glycol-based antifreeze/coolant is a regu- not need to remove the radiator cap unless checking for lated substance requiring proper disposal. Check with antifreeze/coolant freeze point or replacing antifreeze/ your local authorities to determine the disposal rules for coolant.
Page 406: Hoses And Vacuum/Vapor Harnesses
406 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be bottle hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. •...
Page 407: Fuel System Connections
MAINTAINING YOUR VEHICLE 407 Pay particular attention to the hoses nearest to high heat You are urged to use only the manufactures-specified sources such as the exhaust manifold. Inspect hose rout- tubes, connections and clamps, or their equivalent in ing to be sure hoses do not touch any heat source or material and specification, in any fuel system servicing.
Page 408 408 MAINTAINING YOUR VEHICLE Brake and Power Steering System Hoses NOTE: Inspection of brake hoses should be done when- When servicing the vehicle for scheduled maintenance, ever the brake system is serviced and every engine oil inspect surface of hoses for evidence of heat and me- change.
Page 409 MAINTAINING YOUR VEHICLE 409 fluid reservoir. With disc brakes, fluid level can be WARNING! expected to fall as the brake pads wear. However, low fluid level may be caused by a leak and a checkup may be Overfilling the brake fluid reservoir can result in needed.
Page 410: Front/Rear Axle Fluid
410 MAINTAINING YOUR VEHICLE Front/Rear Axle Fluid Transfer Case Front Axle Fluid Level Check Fluid Level Check Lubricant should be to the bottom of the oil fill hole. Inspect the transfer case for fluid leaks. If a fluid leak is found, the transfer case fluid level can be checked by Rear Axle Fluid Level Check removing the filler plug located on the back side of the...
Page 411: Automatic Transmission
MAINTAINING YOUR VEHICLE 411 for correct fluid type. It is important that the transmission CAUTION! fluid be maintained at the prescribed level using the recommended fluid. When installing plugs, do not overtighten. You could damage them and cause them to leak. CAUTION! Using a transmission fluid other than the manufac- Selection of Lubricant...
Page 412 412 MAINTAINING YOUR VEHICLE If you notice fluid loss or gear shift malfunction, have To check the automatic transmission fluid level properly, your authorized dealer check the transmission fluid level. the following procedure must be used: 1. Operate the engine at idle speed and normal operating CAUTION! temperature.
Page 413 MAINTAINING YOUR VEHICLE 413 the fluid is low, add as required into the dipstick tube. Do CAUTION! not overfill. After adding any quantity of oil through the oil fill tube, wait a minimum of two (2) minutes for the oil Be aware that if the fluid temperature is below 50°F to fully drain into the transmission before rechecking the (10°C) it may not register on the dipstick.
Page 414: Maintenance After Off-Road Driving
414 MAINTAINING YOUR VEHICLE Special Additives After off-road driving, completely inspect the underbody Automatic Transmission Fluid (ATF) is an engineered of your vehicle. Check tires, body structure, steering, product and its performance may be impaired by supple- suspension and exhaust system for damage. Check mental additives.
Page 415: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 415 • Salt in the air near seacoast localities. Appearance Care And Protection From Corrosion • Atmospheric fallout/industrial pollutants. Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo- Washing graphic locations and usage. Chemicals that make roads •...
Page 416 416 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is considered the responsibility of the owner. • Do not use abrasive or strong cleaning materials •...
Page 417 MAINTAINING YOUR VEHICLE 417 Wheel and Wheel Trim Care Mopar Spot & Stain Remover if absolutely necessary. Do All wheels and wheel trim, especially aluminum and not use harsh cleaners or Armorall. Use Mopar Total chrome plated wheels should be cleaned regularly with a Clean to clean vinyl upholstery.
Page 418 418 MAINTAINING YOUR VEHICLE Glass Surfaces WARNING! All glass surfaces should be cleaned on a regular basis with Mopar Glass Cleaner or any commercial Do not use volatile solvents for cleaning purposes. household-type glass cleaner. Never use an abrasive type Many are potentially flammable, and if used in cleaner.
Page 419: Fuse Panel
MAINTAINING YOUR VEHICLE 419 2. Dry with a soft tissue. FUSE PANEL Seat Belt Maintenance Interior Fuses Do not bleach, dye or clean the belts with chemical The fuse panel is on the lower instrument panel just to solvents or abrasive cleaners. This will weaken the fabric. the left of the steering column.
Page 420 420 MAINTAINING YOUR VEHICLE Cav- Cartridge Cav- Cartridge Mini Fuse Description Mini Fuse Description Fuse Fuse 30 Amp Audio Amp (B+) 20 Amp Pwr Outlet (B+) Green Yellow 15 Amp Sunroof (B+) 10 Amp Final Drive Control Blue Module (FDCM), Heater Ventilation, Air 10 Amp Htd Mirror (EBL)
Page 421 MAINTAINING YOUR VEHICLE 421 Cav- Cartridge Cav- Cartridge Mini Fuse Description Mini Fuse Description Fuse Fuse 10 Amp Autowipe (R/A) Spare (Acc De- lay) 20 Amp Cigar Ltr (R/A) Yellow 15 Amp Rear Wiper (B+) Blue 10 Amp Tire Pressure Trans- ducers (R/O) 10 Amp Power Distribution...
Page 422: Underhood Fuses (Power Distribution Center)
422 MAINTAINING YOUR VEHICLE Underhood Fuses (Power Distribution Center) Cav- Cartridge Mini Fuse Description Fuse 40 Amp HID Headlamps Green 50 Amp PTC Heater 2 (Diesel Green Only) 30 Amp Power Outlets Pink 50 Amp PTC Heater 3 (Diesel Only) 30 Amp Cig Lighter, Trail Tow Pink...
Page 423 MAINTAINING YOUR VEHICLE 423 Cav- Cartridge Cav- Cartridge Mini Fuse Description Mini Fuse Description Fuse Fuse 40 Amp HVAC Blower 40 Amp JB Power Green Green 30 Amp Rear Wiper, Ign R/O — Spare Pink 20 Amp Fuel Pump 40 Amp Rear Window De- Yellow Green...
Page 424 424 MAINTAINING YOUR VEHICLE Cav- Cartridge Cav- Cartridge Mini Fuse Description Mini Fuse Description Fuse Fuse 20 Amp HD Washer (If — Spare Yellow Equipped) 20 Amp Ignition Switch 30 Amp ABS Valves Yellow Green 20 Amp HID Left 20 Amp PCM Batt (Gasoline Yellow Yellow...
Page 425: Underhood Fuses
MAINTAINING YOUR VEHICLE 425 Underhood Fuses (Integrated Power Module) Cav- Cartridge Mini Fuse Description Fuse 10 Amp Trailer-Tow Park Lamps 10 Amp Rt Park Lamps 20 Amp Front Control Module Yellow (FCM) Batt #4 20 Amp Front Control Module Yellow (FCM) Batt #2 20 Amp Adjustable Pedal...
Page 426: Module)
426 MAINTAINING YOUR VEHICLE Cav- Cartridge Cav- Cartridge Mini Fuse Description Mini Fuse Description Fuse Fuse 20 Amp Front Control Module 10 Amp Occupant Restraint Yellow (FCM) Batt #1 Controller (ORC) R/S 20 Amp Lt Trailer-Tow Stop/ 10 Amp Occupant Restraint Yellow Turn Controller (ORC) R/O...
Page 427: Replacement Bulbs
MAINTAINING YOUR VEHICLE 427 • Anytime you store your vehicle, or keep it out of Exterior Lights Bulb Type service (i.e. vacation) for two weeks or more, run the Backup Lights ......3057K air conditioning system at idle for about five minutes Front Fog Lights .
Page 428: Bulb Replacement
428 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Head Light 1. Open the hood. 2. Remove the headlamp cover. Insert a finger into each hole of the headlamp cover, and pull upward to unsnap the rear edge of the cover from the two upper lamp mounting brackets. Slide the cover rearward to disengage the front edge from beneath the tab on the top near the front of the lamp housing.
Page 429 MAINTAINING YOUR VEHICLE 429 5. Pull the bulb and base straight out from the opening in the reflector. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
Page 430: Front Turn Signal
430 MAINTAINING YOUR VEHICLE Front Turn Signal 3. Reach through the access hole to access the park/turn signal bulb socket on the bottom of the front lamp unit 1. Turn the steering wheel all the way to the left or right. housing.
Page 431 MAINTAINING YOUR VEHICLE 431 4. Turn the socket on the bottom of the front lamp unit Front Fog Light housing 1/4 turn counter clockwise to unlock it. 1. Turn the steering wheel all the way to the left or right. 5.
Page 432 432 MAINTAINING YOUR VEHICLE 3. Reach through the access hole to access the back of the Rear Tail, Stop, Turn Signal, and Back-Up Lights front fog light housing on the back of the front fascia. 1. Raise the liftgate. 4. Disconnect the electrical connector. 2.
Page 433 MAINTAINING YOUR VEHICLE 433 3. Pull the outboard side of the rear lamp unit rearward far enough to unsnap the two ball studs on the outboard side of the lamp housing from the two plastic grommets in the quarter outer panel. Pull the lamp unit rearward far enough away to access the bulbs.
Page 434: Vehicle 72
434 MAINTAINING YOUR VEHICLE 7. Pull the base of the bulb straight out of the socket. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
Page 435 MAINTAINING YOUR VEHICLE 435 FLUIDS AND CAPACITIES U.S. Metric Fuel (Approximate) 21 Gallons 79 Liters Engine Oil with Filter 3.7 Liter Engine (SAE 5W-20, API Certified) 5 Qts 4.7 Liters 4.7 Liter Engine (SAE 5W-20, API Certified) 6 Qts 5.7 Liters 5.7 Liter Engine (SAE 5W-20, API Certified) 7 Qts 6.6 Liters...
Page 436 436 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) Engine Oil (3.7L/4.7L/5.7L En- Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of gines) DaimlerChrysler Material Standard MS-6395.
Page 437 MAINTAINING YOUR VEHICLE 437 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Mopar ATF+4 Automatic Transmission Fluid Transfer Case (NV140 Single Speed Mopar ATF+4 Automatic Transmission Fluid Only) Transfer Case (NV245 Two Speed Mopar NV 247/245 Transfer Case Lubricant Only) Axle Differential (Front-Rear) Mopar Synthetic Gear &...
Page 439 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..440 Required Maintenance Intervals ... 442 Maintenance Schedule — Gasoline Engines ..440...
Page 440 440 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE — GASOLINE The “Scheduled” maintenance services, listed in bold ENGINES type must be done at the times or mileages specified to The oil change indicator system will remind you that it is assure the continued proper functioning of the emission time to take your vehicle in for scheduled maintenance.
Page 441 MAINTENANCE SCHEDULES 441 • Change your engine oil more often if you drive your • Check the windshield washer solvent and add if vehicle off-road for an extended period of time. required. • Under no circumstances should oil change intervals Once a Month exceed 6,000 miles (10,000 km) or 6 months, whichever •...
Page 442 442 MAINTENANCE SCHEDULES At Each Oil Change Required Maintenance Intervals • Change the engine oil filter. NOTE: ** Vehicles built with the 4.7L engine are equipped with sixteen spark plugs, one set is located on • Inspect the brake hoses and lines. the top of the engine under the coils and the second set is located on the side of the engine.
Page 443 MAINTENANCE SCHEDULES 443 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter. 6,000 10 000 Rotate tires. 6,000 10 000 If using your vehicle for any of the following: Dusty or off-road conditions.
Page 444 444 MAINTENANCE SCHEDULES Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the engine air cleaner filter. 30,000 50 000 Check the PCV valve, replace if necessary. Perform the first inspection at 60,000 miles (100 000 km) or 60 30,000 50 000...
Page 445 MAINTENANCE SCHEDULES 445 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the side row of spark plugs (4.7L Only). ** 102,000 170 000 Change the automatic transmission fluid & filter. 120,000 200 000 Replace accessory drive belt(s) (3.7L/4.7L/5.7L En-...
Page 447: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Reporting Safety Defects ....451 Vehicle ......448 In Canada .
Page 448: Suggestions For Obtaining Service For Your Vehicle
Warranty service must be done by an authorized or work done that is not on your maintenance log, let the Chrysler, Dodge, or Jeep dealer. We strongly recommend service advisor know. that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
Page 449 IF YOU NEED CONSUMER ASSISTANCE 449 • Vehicle identification number technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely • Vehicle delivery date and mileage manner. DaimlerChrysler Motors Corporation Customer Center This is why you should always talk to your dealer’s P.O.
Page 450 450 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech contract, call the manufacturer’s Service Contract Na- tional Customer Hotline at 1-800-521-9922. Impaired (TDD/TTY) To assist customers who have hearing difficulties, the The manufacturer will not stand behind any service manufacturer has installed special TDD (Telecommuni- contract that is not the manufacturer’s Service Contract.
Page 451: Warranty Information (U.s. Vehicles Only)
IF YOU NEED CONSUMER ASSISTANCE 451 MOPAR PARTS WARNING! Mopar fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep your Engine exhaust, some of its constituents, and certain vehicle operating at its best. vehicle components contain or emit chemicals known to the State of California to cause cancer and REPORTING SAFETY DEFECTS birth defects or other reproductive harm.
Page 452: In Canada
452 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety PUBLICATION ORDER FORMS Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– To order the following manuals, you may use either the 9153), or go to http://www.safercar.gov; or write to: website or the phone numbers listed below.
Page 453 IF YOU NEED CONSUMER ASSISTANCE 453 • Diagnostic Procedure Manuals. Call Toll Free at: • 1–800–890–4038 (U.S.) Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and • 1–800–387–1143 (Canada) technicians to find and fix problems on computer- controlled vehicle systems and features.
Page 454: Department Of Transportation Uniform Tire Quality Grades
454 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM may depart significantly from the norm due to variations in driving habits, service practices and differences in road TIRE QUALITY GRADES The following describes the tire grading categories estab- characteristics and climate. lished by the National highway Traffic Safety Adminis- Traction Grades tration.
Page 455: Temperature Grades
IF YOU NEED CONSUMER ASSISTANCE 455 Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat when tested under a tire that is properly inflated and not overloaded.
Page 457 INDEX...
Page 458 458 INDEX ABS (Anti-Lock Brake System) ... . 188,302 Alarm System (Security Alarm) ....20 Adding Fuel ......341 Alignment and Balance .
Page 459 INDEX 459 Fluid and Filter Changes ....411 Brake System ......407 Fluid Level Check .
Page 460 460 INDEX Cargo Compartment ..... . 174 Compact Disc (CD) Maintenance ... . . 256 Luggage Carrier .
Page 461 INDEX 461 Pressure Cap ......404 Oil (Engine) ......389 Radiator Cap .
Page 462 462 INDEX Electronic Brake Control System ... . . 139 Engine Anti-Lock Brake System ....139 Air Cleaner .
Page 463 INDEX 463 Starting ......277 Turn Signal ..... 187,430,432 Temperature Gauge .
Page 464 464 INDEX Folding Rear Seat ..... 113,117 Fuel, Flexible ... . . See Flexible Fuel Vehicles Four Wheel Drive .
Page 465 INDEX 465 GVWR ....... 344 Hitches Trailer Towing ......350 Hands-Free Phone (UConnect™) .
Page 466 466 INDEX Instrument Panel and Controls ....185 Key-In Reminder ......17 Instrument Panel Lens Cleaning .
Page 467 INDEX 467 Battery Saver ......125 High Beam Indicator ....187 Brake Assist Warning .
Page 468 468 INDEX Tire Pressure Monitoring (TPMS) ... 190 Maintenance Free Battery ....395 Tow/Haul Indicator .
Page 469 INDEX 469 Modifications/Alterations, Vehicle ... . . 9 Oil, Engine ......389 Monitor, Tire Pressure System .
Page 470 470 INDEX Overheating, Engine ....192,367 USB ....... . 239 Owner’s Manual (Operator Manual) .
Page 471 INDEX 471 Quadra-Trac ......290,291 Rear Wiper/Washer ..... . 176 Rearview Mirrors .
Page 472 472 INDEX Restraints, Occupant ..... . 38 And Pregnant Women ....47 Rocking Vehicle When Stuck .
Page 473 INDEX 473 Rear Folding ..... . . 113,117 Signals, Turn ....129,187,430,432 Reclining .
Page 474 474 INDEX Remote ......26 Telescoping Steering Column ....134 Steering Temperature Control, Automatic (ATC) .
Page 475 INDEX 475 Life of Tires ......320 Disabled Vehicle ..... . . 378 Load Capacity .
Page 476 476 INDEX Maintenance ......411 Upholstery Care ......417 Range Indicator .
Page 477 INDEX 477 Washers, Windshield ....131,400 Power ....... 31 Washing Vehicle .
Page 478 INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN)Fob with Integrated Key (FOBIK)Ignition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key (Fob) ProgrammingGeneral InformationSECURITY ALARM SYSTEM - IF EQUIPPED To Set the AlarmTo Disarm the SystemILLUMINATED ENTRY REMOTE KEYLESS ENTRY To Unlock the DoorsTo Lock the DoorsTo Release the Liftgate Flipper GlassUsing The Panic AlarmProgramming Additional TransmittersTransmitter Battery ServiceGeneral Information REMOTE STARTING SYSTEM - IF EQUIPPED DOOR LOCKS Manual Door LocksPower Door LocksChild Protection Door LockWINDOWS Power WindowsWind BuffetingLIFTGATE Liftgate Flipper GlassPower Liftgate - If EquippedOCCUPANT RESTRAINTS Lap/Shoulder BeltsLap/Shoulder Belt Operating InstructionsAdjustable Upper Shoulder Belt AnchorageAutomatic Locking Mode - If EquippedEnergy Management FeatureSeat Belt PretensionersEnhanced Seat Belt Use Reminder System (BeltAlert)Seat Belts and Pregnant WomenSeat...

This manual is also suitable for:

2008 commander