Retrieve Alarm Status - Symmetricom SSU-2000e Technical Reference

Retrieve Alarm Status

This command returns the current status of alarms from a specified module.
Syntax
RTRV-STATUS-ALARM:[tid]:[aid]:ctag;
Parameter
[aid]
Response Format
^^^"aid:almnum,stat" <cr lf>
where:
= module or port access identifier
aid
= alarm number for that aid
almnum
= current state of each alarm condition [OK | BAD]
status
Related Commands
Retrieve Alarm
12713140-003-2 Revision E.01 – January 2007
Value
Retrieves the Alarm parameters from the specified
SxAy
module.
Status, on page 41
Chapter 2 TL1 Reference
Retrieve Alarm Status
Description
SSU-2000e Technical Reference 41