Table of Contents
Advertisement
Related Documents and Information
Other helpful documents and software tools are listed below. See your
Symmetricom representative or sales office for a complete list of available
documentation.
SSU-2000e User's Guide
SynCraft management software
TimePictra management software
Note: Symmetricom offers a number of applicable training courses
designed to enhance product usability. Contact your local
representative or sales office for a complete list of courses and
outlines.
Where to Find Answers to Product and Document
Questions
For additional information about the products described in this guide, please contact
your Symmetricom representative or your local sales office. You can also contact us
on the web at www.symmetricom.com.
What's New in This Document
Revision E.01 contains the following changes and new information:
Corrected the time format described on pages 27–31.
Added a description of the ACO feature in
ALARM, on page 169.
Added new parameters to the response for the TL1 command
Parameters, on page 46.
Added new parameters to the response for the TL1 command
Data, on page 61.
Added new parameters to the response for the TL1 command
Input
Parameters, on page 63.
Added the new TL1 command
The limit range for the MTIE parameter in the TL1 command
Parameters, on page 139, is changed to 0 to 60000.
The limit range for the MTIE parameter in the ICS command INPUT, on page
192, is changed to 0 to 60000.
The ICS command RESTART, on page 218, now requires a valid module
address.
The ICS command SETUP, on page 220, contains the new REPORT parameter.
12713140-003-2 Revision E.01 – January 2007
Retrieve Alarm
Retrieve Setup
Parameters, on page 100.
How to Use This Guide
Cutoff, on page 36 and
Retrieve Clock
Retrieve GPS
Retrieve GPS
Set MTIE
SSU-2000e Technical Reference
17
Advertisement
Table of Contents
