Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve MTIE History
Retrieve MTIE History
This command returns the historical MTIE data for a port on a DS1, E1, Sine, or
GPS Input module. The Historical MTIE data is the 24-hour MTIE data stored every
day at midnight. There are 99 historical MTIE records stored. The command
requires an aid to identify the input port to report data from. The optional parameters
are the clock identifier and the number of day(s) of MTIE history to be retrieved from
the current day (day 0). If you do not specify a clock source [CLK-A | CLK-B], the
current output clock is used.
Syntax
RTRV-DATA-MTIE-HIST:[tid]:aid:ctag[::[clksrc][,count];
Parameter
[aid]
[clksrc]
[count]
Response Format
The response is the complied message followed by the requested data.
^^^"aid:ocrdat,ocrtm,MTIE,clksrc,monval1,monval2,.., monval8"<cr lf>
where:
= port access identifier
aid
and
ocrdat
= CLK-A or CLK-B used for the measurements
clksrc
= the data value for the time period, given in nanoseconds. There are
monval?
eight monvals in sequence, and the time periods in sequence are 0.05, 0.1, 1,
10, 100, 1000, 10000, and 100000
Example
SSU_2000 06-06-26 12:51:44
M
100 COMPLD
"S1A05-01:06-06-21,00:01:00,MTIE,CLK-A,21,21,21,49,57,61,73,79"
"S1A05-01:06-06-22,00:01:00,MTIE,CLK-A,11,11,11,20,24,33,40,79"
"S1A05-01:06-06-23,00:01:00,MTIE,CLK-A,11,11,11,19,27,30,39,54"
"S1A05-01:06-06-24,00:01:00,MTIE,CLK-A,12,12,12,20,26,29,41,54"
"S1A05-01:06-06-25,00:01:00,MTIE,CLK-A,9,9,9,19,24,30,40,53"
;
Related Commands
Retrieve MTIE
78
SSU-2000e Technical Reference
Value
Retrieves the current MTIE history data from the specified
S1Ay-z
Input port.
Specifies which clock supplies the MTIE history data.
CLK-A |
CLK-B
Specifies the number of days of MTIE history to retrieve.
1 - 99
= beginning date and time the data was collected
ocrtm
Data, on page 76
Description
12713140-003-2 Revision E.01 – January 2007
Advertisement
Table of Contents
