Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve Security Log
Retrieve Security Log
This command retrieves the max number of the last latest security log. If there is no
count specified, it shall display the last latest one. The count is up to the max
resource of the COMM Module in the NVRAM. If it is too big, this command
automatically adjusts the number to its own maximum. The current max limit is set
to 300. Note: the actual max number is limited on the NVRAM resource.
Syntax
RTRV-SECU-LOG:[tid]::ctag::[count];
Parameter
[count]
Response Format
^^^"condType,ocrdat,ocrtm:condstr" <cr lf>
where:
condType
= occurrence date
ocrdat
= occurrence time
ocrtm
= condition description string
condstr
Example
SSU_2000 05-10-05 15:49:08
M
1 COMPLD
"2,05-10-04,18:01:40:\"LOGIN_FAIL,COML,ICS,ADMIIN\""
"1,05-10-04,18:01:56:\"LOGIN,COML,ICS,ADMIN\""
"4,05-10-04,18:12:11:\"AUTO_LOGOUT,COML,ICS,ADMIN\""
"1,05-10-05,15:41:29:\"LOGIN,ENET,TL1,ADMIN\""
"1,05-10-05,15:48:55:\"LOGIN,COML,ICS,ADMIN\""
;
98
SSU-2000e Technical Reference
Value
Retrieves the specified number of log events
[1 - 300]
Retrieves the most recent log event
[null]
= the Security Log identification number
"1,05-10-04,18-00-47:\"LOGIN,COML,ICS,ADMIN\""
Description
12713140-003-2 Revision E.01 – January 2007
Advertisement
Table of Contents
