Unpacking The Cutter - MUTOH MC series Operation Instructions Manual

Setting up the cutter

UNPACKING THE CUTTER

•
When unpacking the cutter, check whether all parts described in the parts
lists are included in the boxes. Consult your dealer if anything seems to be
missing.
•
Lifting the machine out of the box should be done by two persons.
•
Protect the plotter from firm shocks.
•
Do not dismantle the unit.
To unpack the cutter:
1. Lift the cutter unit out of the box and put it on a flat, stable surface.
2. Take out the accessories box.
3. Remove all plastic wrapping materials.
4. Remove the pieces of foam.
5. Unpack the stand.
WHAT'S IN THE BOX ?
• MC plotter unit with roll support system, 2 conveyor rolls and
small guiding flanges
• Cutting plotter stand
• Mutoh MC-Series User's Guide
• Knife holder with depth indication (+ 1 cutting blade)
• Set of 2 spare cutting blades 45°
• Set of 2 water-based fibre tip pens
• Spare cutting mat
• Power Cord
• RS-232 Serial interface cable
• 3" core roll media guiding flanges (2 pcs)
Operation Instructions MC-Series cutting plotters
2
Page
AP-75020, Rev. 1.0 - 18/12/98