Backlight Power Select; Lcd/Inverter Power Select - DFI BT160 User Manual

Backlight Power Select

JP16 is used to select the power level of backlight brightness control: +5V or +3.3V.
Important:
Before powering-on the system, make sure that the power settings of JP16 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.
Chapter 2 Hardware Installation
Chapter 2
1 2 3
JP16
1-2 On: +5V
1 2 3
2-3 On: +3.3V (default)
18

LCD/Inverter Power Select

JP21 is used to select the power level of the LCD/inverter power connector.
1 2 3
1-2 On: +12V
JP21
1 2 3
2-3 On: +5V (default)
www.dfi .com