DFI BT160 User Manual page 40

CSM Configuration
This section configures the CSM settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Compatibility Support Module Confi guration
CSM Support [Enabled]
CSM16 Module Version 07.71
Boot option fi lter [UEFI and Legacy]
Option ROM execution order
Network [Do not launch]
Storage [Legacy only]
Video [Legacy only]
Other PCI devices [UEFI only]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
CSM Support
This field is used to enable or disable the CSM support.
Boot option filter
This option controls Legacy/UEFI ROMs priority.
Network
This field controls the execution of UEFI and Legacy PXE OpROM.
Storage
This field controls the execution of UEFI and Legacy Storage OpROM.
Video
This field controls the execution of UEFI and Legacy Video OpROM.
Other PCI devices
This field determines OpROM execution policy for devices other than network, storage
or video.
Chapter 3 BIOS Setup
Chapter 3
Trusted Computing (Optional by H/W)
This section configures settings relevant to Trusted Computing innovations.
Enable/Disable CSM
support

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
40
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Confi guration
Security Device Support [Disable]
Current Status Information
SUPPORT TURNED OFF
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Security Device Support
This field is used to enable or disable BIOS supporting for the security device. O.S will
not show the security device. TCG EFI protocol and INT1A interface will not be
available.
Enables or Disables
BIOS support for security
device. O.S. will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi .com