Panel Power Select
JP11 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP11 match
the LCD panel's specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
Chapter 2 Hardware Installation
Chapter 2
5 3
1
JP11
6 4 2
1-2 On: +12V
5 3
1
6 4 2
3-4 On:+5V
5 3
1
6 4 2
5-6 On: +3V (default)
18
Backlight Power Select
JP2 is used to select the power level of backlight brightness control: +12V or +5V.
Important:
Before powering-on the system, make sure that the power settings of JP2 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.
3
2
1
JP2
1-2 On: +12V (default)
3
2
1
2-3 On: +5V
www.dfi .com