1. Manuals
  2. Brands
  3. DFI Manuals
  4. Motherboard
  5. BT160
  6. User manual

DFI BT160 User Manual

Industrial motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BT160/161
Mini-ITX Industrial Motherboard
User's Manual
A31630736
1

Advertisement

Table of Contents
loading

Related Manuals for DFI BT160

Summary of Contents for DFI BT160

  • Page 1 BT160/161 Mini-ITX Industrial Motherboard User’s Manual A31630736...

  • Page 2: Copyright

    Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules.

  • Page 3: Table Of Contents

    LCD/Inverter Power Connector ..............27 Cooling Fan Connectors................28 Warranty ......................4 LAN LED Connector ..................28 ATX Power Connector - BT160 ..............29 Static Electricity Precautions EXC Power Connector ................. 29 ..............4 Expansion Slots ..................30 Safety Measures Standby Power LED ..................

  • Page 4: About This Manual

    About this Manual Static Electricity Precautions An electronic file of this manual is included in the CD. To view the user’s manual in the CD, in- It is quite easy to inadvertently damage your PC, system board, components or devices even sert the CD into a CD-ROM drive.

  • Page 5: About The Package

    The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One BT160/161 motherboard • Serial ATA data cable - BT160 • One Serial ATA data with power cable - BT161 • One Heat sink •...

  • Page 6: Chapter 1 - Introduction

    C to 85 • Read back capability that displays temperature, voltage and fan speed Power • BT160-BN-E45: 10.75W with E3845 at 1.91GHz and 2x 2GB DDR3L SODIMM • BT161-BN-E45: 16.32W with E3845 at 1.91GHz and 2x 4GB DDR3L SODIMM Consumption Chapter 1 Introduction www.dfi...

  • Page 7: Features

    Chapter 1 Features Humidity • 5% to 90% Dimensions • Mini-ITX form factor • Watchdog Timer - 170mm (6.7") x 170mm (6.7") Certifi cation • CE, FCC Class B, RoHS The Watchdog Timer function allows your application to regularly “clear” the system at the set time interval.

  • Page 8: Power Failure Recovery

    Chapter 1 • Wake-On-LAN • Power Failure Recovery This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC. It is When power returns after an AC power failure, you may choose to either power-on the system supported via the onboard LAN port or via a PCIe LAN card that uses the PCIe PME (Power manually or let the system power-on automatically.

  • Page 9: Chapter 2 - Hardware Installation

    (JP25) COM 4 (JP24) (JP24) (JP22) (JP25) (JP23) RS232/Power Storage DFI Proprietary Select Extension Bus Expansion Important: Although ECC and non-ECC SODIMMs share the same socket together, ECC SODIMMs cannot be pinout compatible with standard, non-ECC SODIMMs. Chapter 2 Hardware Installation...
  • Page 10 Data will be accessed in chunks of 64 bits (8B) from the memory channels. Dual Channel (DC) Data will be accessed in chunks of 128 bits from the memory channels. Dual channel provides better system performance because it doubles the bandwidth.   Chapter 2 Hardware Installation www.dfi.com...

  • Page 11: Installing The Dimm Module

    Chapter 2 Installing the DIMM Module 5. Grasping the module by its edges, align the module into the socket at an approximately 30 degrees angle. Apply firm even pressure to each end of the module until it slips down into the socket.

  • Page 12: Installing The Fan And Heat Sink

    Chapter 2 Installing the Fan and Heat Sink 4. Place the fan / heat sink assembly on top of the CPU. The 4 screws around the heat sink must match the screw holes of the retention module base. We strongly recommend using this type of fan / heat sink assembly because it provides adequate cooling to the compo- The CPU must be kept cool by using a CPU fan with heat sink.

  • Page 13: Jumper Settings

    Chapter 2 Jumper Settings Auto Power-on Select Clear CMOS Data JP12 1-2 On: 1-2 On: Normal (default) Power-on via power button (default) 2-3 On: 2-3 On: Clear CMOS Data Power-on via AC power If you encounter that CMOS data becomes corrupted, you can reconfigure the system with the JP12 is used to select the method of powering on the system.

  • Page 14: Usb Power Select

    Chapter 2 USB Power Select SATA 1/mSATA Signal Select USB 1-2 (JP5) 1-2 On: +5V (default) 2-3 On: +5V_standby USB 4-5 1-2 On: +5V (JP7) (default) 2-3 On: +5V_standby USB 3 JP10 (JP14) 1-2 On: +5V 2-3 On: (default) +5V_standby 2-5-8-11, 3-6-9-12 On: 1-4-7-10, 2-5-8-11 On: mSATA...

  • Page 15: Com 4 Rs232/422/485 Select

    Chapter 2 COM 4 RS232/422/485 Select Note: When COM 4 RS232/422/485 is selected, JP23 and JP25 must be set in accordance to JP22. COM 4: RS232/422/485 1-3, 2-4 On: RS232 (default) JP23 JP25 3-5, 4-6 On: RS422 Full Duplex/RS485 JP22 JP22, JP23 and JP25 are used to configure the COM port 4 to RS232, RS422 (Full Duplex) or RS485.

  • Page 16: Com 4 Rs232 Power Select

    Chapter 2 COM 4 RS232/Power Select Mini PCIe/mSATA Signal Select COM 4 JP24 1-3 (RI), 2-4 (DCD) On: 3-5 (+5V), 4-6 (+12V) On: 2-5-8-11, 3-6-9-12 On: 1-4-7-10, 2-5-8-11 On: RS232 (default) RS232 with power PCIe (default) mSATA (optional) JP24 is used to configure the Serial COM port 4 to pure RS232 or RS232 with power. JP9 is used to select the Mini PCIe signal: PCIe or mSATA (optional).

  • Page 17: Mini Pcie/Msata Power Select

    Chapter 2 Mini PCIe/mSATA Power Select Panel Power Select 1-2 On: +12V 3-4 On:+5V JP19 5-6 On: +3.3V (default) JP19 is used to select the power supplied with the LCD panel. 1-2 On: +3.3V_standby (Mini PCIe) 2-3 On: +3.3V (mSATA) (default) Important: Before powering-on the system, make sure that the power settings of JP19 match...

  • Page 18: Backlight Power Select

    Chapter 2 Backlight Power Select LCD/Inverter Power Select 1-2 On: +12V JP16 JP21 1-2 On: +5V 2-3 On: +5V (default) 2-3 On: +3.3V (default) JP16 is used to select the power level of backlight brightness control: +5V or +3.3V. JP21 is used to select the power level of the LCD/inverter power connector. Important: Before powering-on the system, make sure that the power settings of JP16 match the power specification of backlight control.

  • Page 19: Sata Dom Power Select

    Chapter 2 SATA DOM Power Select Digital I/O Power Select JP17 1-2 On: +5V_standby 2-3 On: +5V (default) SATA 0 JP13 1-2 On: GND (default) JP17 is used to select the power of DIO (Digital I/O) signal. 2-3 On: +5V JP13 is used to select the power level of SATA DOM.

  • Page 20: Digital I/O Output State

    Chapter 2 Digital I/O Output State Dimming Mode Select DIO 0-3 (JP20) 1-2 On: +5V or +5V_standby DIO 4-7 (JP18) 2-3 On: GND (default) 1-2 On: PWM Mode JP15 2-3 On: Voltage Mode (default) Based on the power level of DIO (Digital I/O) selected on JP17, JP20 (DIO pin 0-3) and JP18 JP15 allows you to select the mode for the lightness control of the LVDS panel.

  • Page 21: Rear Panel I/O Ports

    Chapter 2 Rear Panel I/O Ports 12V DC-in (default) - BT161 DC-in LAN 1 LAN 2 DC-in COM 1 USB 2.0 USB 3.0 The rear panel I/O ports consist of the following: • 1 12V DC-in jack (default) or 4-pin power connector (optional) - BT161 •...

  • Page 22: Com (Serial) Ports

    Chapter 2 COM (Serial) Ports Graphics Interface The display port consists of the following: • 1 VGA port COM 1: RS232 COM 2 COM 3 COM 4 COM 2 and COM 3: RS232 COM 4 : RS232/422/485 COM 1 to COM 3 are fixed at RS232. VGA Port The pin functions of COM port 4 will vary according to JP22’s, JP23’s and JP25’s setting.

  • Page 23: Rj45 Lan Ports

    Chapter 2 RJ45 LAN Ports USB Ports USB 1 USB 3.0 USB 2 USB 2.0 LAN 1 LAN 2 LAN 1 LAN 2 USB 4-5 USB 3 Features +Data • 2 Intel I210 PCI Express Gigabit Ethernet controllers ® -Data USB 2.0 The LAN ports allow the system board to connect to a local area network by means of a network hub.

  • Page 24: I/O Connectors

    Digital I/O Connector USB type in table 2 below. Pins Function Table 2. The Type of USB Ports DIO7 Model Name BT160/BT161 DIO6 Native USB 3.0 DIO5 USB 0 Native (for Mini PCIe) USB 1 Native (share with USB 3.0 port)

  • Page 25: Sata (Serial Ata) Connectors

    Chapter 2 SATA (Serial ATA) Connectors SATA (Serial ATA) Power Connectors - BT161 SATA 0 SATA Power 0 +12V Ground Ground SATA 1 SATA Power 1 SATA 2.0 3Gb/s (SATA port 0 provides adequate space for SATA DOM.) Features • 2 Serial ATA 2.0 ports These SATA power connectors supply power to the SATA drive.

  • Page 26: Front Panel Connector

    Chapter 2 Front Panel Connector Chassis Intrusion Connector 12 11 RESET-SW PWR-BTN Front HDD-LED Panel PWR-LED Chassis Intrusion HDD-LED - HDD LED This LED will light when the hard drive is being accessed. The board supports the chassis intrusion detection function. Connect the chassis intrusion sensor cable from the chassis to this connector.

  • Page 27: Lvds Lcd Panel Connector

    Configure the LCD panel in the Advanced/Chipset Features submenu of the Panel Power Panel Power BIOS. Refer to chapter 3 for more information. Note: DFI board's LVDS connector: Hirose DF13-40DP-1.25V(91)/40P/1.25mm; cable side connector: Hirose DF13-40DS-1.25C. Chapter 2 Hardware Installation www.dfi .com...

  • Page 28: Cooling Fan Connectors

    Chapter 2 Cooling Fan Connectors LAN LED Connector System Fan LAN 2 State LAN 2 State LAN 1 State LAN 1 State CPU Fan Sense Power Ground The LAN LED connector is used to detect the connection state of RJ45 LAN ports (J17 and J18 for LAN 1, and J15 and J16 for LAN 2) when the connection is made to an active network via a cable.

  • Page 29: Atx Power Connector - Bt160

    Chapter 2 ATX Power Connector - BT160 EXC Power Connector power power 19 20 The EXC power connector provides power supply for an EXC card to operate when the EXC card is installed into the EXC interface. The pin functions of the EXC power connector are listed below.

  • Page 30: Expansion Slots

    Install PCI Express cards such as network cards or other cards that comply to the PCI Express specifications into the PCI Express x1 slot. DFI Proprietary Extension Bus The DFI Proprietary Extension Bus gold finger is used for customized expansion (PCI or Mini PCIe) via a riser card. Chapter 2 Hardware Installation...

  • Page 31: Standby Power Led

    Chapter 2 Standby Power LED Battery Standby Power LED Battery This LED will light red when the system is in the standby mode. It indicates that there is pow- er on the system board. Power-off the PC and then unplug the power cord prior to installing any devices.

  • Page 32: Chapter 3 - Bios Setup

    Chapter 3 Chapter 3 - BIOS Setup Legends Overview Keys Function The BIOS is a program that takes care of the basic level of communication between the CPU and peripherals. It contains codes for various advanced features found in this system board. Right and Left arrows Moves the highlight left or right to select a menu.

  • Page 33: Ami Bios Setup Utility

    Chapter 3 AMI BIOS Setup Utility Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are Main defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.
  • Page 34 Chapter 3 Super IO Configuration Serial Port 1 Configuration to Serial Port 6 Configuration This section is used to configure the parameters of the super IO chip. Set the parameters of serial port 1 (COM A) to serial port 6 (COM F). Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
  • Page 35 Chapter 3 Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Advanced Serial Port 3 Confi guration Serial Port 5 Confi guration Enable or Disable Serial Enable or Disable Serial Port (COM) Port (COM) [Enabled]...
  • Page 36 Chapter 3 When the Advanced Sleep State Control (ASSC) function is set to Enabled, it will Serial Port display the following information: Enable or disable the serial COM port. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Change Settings Advanced Select the IO/IRQ settings for the super I/O device.
  • Page 37 Chapter 3 System Smart Fan Control HW Monitor When this feature is set to Automatic, the system’s fan speed will rotate according to This section is used to monitor the hardware status. the system’s temperature. The higher the temperature, the faster the speed of rotation. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
  • Page 38 Chapter 3 CPU Configuration SATA Configuration This section is used to configure the CPU. It will also display the detected CPU information. This section is used to enable or disable SATA devices. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
  • Page 39 Chapter 3 Network Stack Configuration Ipv4 PXE Support This section is used to enable or disable network stack settings. When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not be created. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Ipv6 PXE Support Advanced Network Stack...
  • Page 40 Chapter 3 CSM Configuration Trusted Computing (Optional by H/W) This section configures the CSM settings. This section configures settings relevant to Trusted Computing innovations. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Advanced Enables or Disables...
  • Page 41 USB type in table 2 below. ESC: Exit Version 2.16.1242 Copyright (C) 2013 American Megatrends, Inc. Table 2. The Type of USB Ports Legacy USB Support Model Name BT160/BT161 Enabled USB 3.0 Native Enable legacy USB. Native (for Mini PCIe) USB 0 Disabled Keep USB devices available only for EFI applications.
  • Page 42 Chapter 3 Security Configuration Intel(R) I210 Gigabit Network Connection - 00:01:29:51... This section only displays the Intel(R) TXE configuration and version. This section is used to configure the parameters of the Gigabit Ethernet device at UEFI mode. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
  • Page 43 Chapter 3 NIC Configuration Intel(R) I210 Gigabit Network Connection - 00:01:29:51... This field is used to configure the network device. This section is used to configure the parameters of the Gigabit Ethernet device at UEFI mode. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

  • Page 44: Chipset

    Chapter 3 Chipset NIC Configuration This field is used to configure the network device. This section configures relevant chipset functions. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Main Advanced...
  • Page 45 Chapter 3 North Bridge Intel IGD Configuration This section configures the North bridge parameters. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Chipset Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. GOP Information Chipset Intel(R) GOP Driver [N/A] ...
  • Page 46 Chapter 3 LCD Control LCD Panel Type Select the LCD panel used by Internal Graphics Device by selecting the appropriate Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. setup item. Please refer to the screen shown below. Chipset LCD Control Select the Video Device Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
  • Page 47 Chapter 3 South Bridge Memory Configuration This field is used to configure the parameters of the South Bridge. This section only displays the parameter of memory configuration. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Chipset Chipset Memory Information...
  • Page 48 Chapter 3 Azalia HD Audio PCI Express Configuration This section configues Azalia HD Audio options. This section configues settings relevant to PCI Express devices. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Chipset Chipset Control Detection of the...

  • Page 49: Security

    Chapter 3 Security Boot Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Main Advanced Main Advanced Chipset Security Boot Save & Exit Chipset Security Boot Save & Exit Number of seconds to Password Description Set Administrator...

  • Page 50: Updating The Bios

    Chapter 3 Save & Exit Updating the BIOS To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS. EXE. Please contact technical support or your sales representative for the files. Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset...

  • Page 51: Notice: Bios Spi Rom

    Chapter 3 Notice: BIOS SPI ROM 1. The Intel Management Engine has already been integrated into this system board. Due to ® the safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and used on another system board of the same model. 2.

  • Page 52: Chapter 4 - Supported Software

    Chapter 4 Chapter 4 - Supported Software For Windows 7 The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear. If after inserting the CD, “Autorun”...

  • Page 53: Intel Chipset Software Installation Utility

    Chapter 4 Intel Chipset Software Installation Utility 3. Go through the readme docu- ment for more installation tips then click Next. The Intel Chipset Device Software is used for updating Windows INF files so that the Intel ® chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility”...
  • Page 54 Chapter 4 Intel HD Graphics Drivers 3. Go through the readme docu- ment for system requirements and installation tips then click To install the driver, click “Intel HD Graphics Drivers” on the main menu. Next. 1. Setup is now ready to install the graphics driver.

  • Page 55: Intel Lan Drivers

    Chapter 4 Intel LAN Drivers 4. Click Install to begin the installation. To install the driver, click “Intel LAN Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 5. After completing installa- tion, click Finish. 2.
  • Page 56 Chapter 4 Kernel Mode Driver Framework (For Windows 7 only) Intel Trusted Execution Engine Driver To install the driver, click “Kernel Mode Driver Framework” on the main menu. To install the driver, click “Intel Trusted Execution Engine Driver” on the main menu. 1.

  • Page 57: Realtek Audio Drivers

    Chapter 4 Realtek Audio Drivers 3. The step displays the installing status in the progress. To install the driver, click “Realtek Audio Drivers” on the main menu 1. Setup is now ready to install the audio driver. Click Next. 2. Follow the remainder of the steps on the screen;...
  • Page 58 Chapter 4 Intel Sideband Fabric Device (MBI) Driver 3. The step performs setup operations. Click “Next“ to (For Windows 8.x only) continue. To install the driver, click “Intel Sideband Fabric Device (MBI) Driver” on the main menu. 1. The setup program will be installed.
  • Page 59 3. Click Install to begin the installation. HW Utility provides information about the board, HW Health, Watchdog, DIO, and Backlight. To access the utility, click “DFI Utility” on the main menu. Note: If you are using Windows 7, you need to access the operating system as an administrator to be able to install the utility.
  • Page 60 Chapter 4 The HW Utility icon will appear on the desktop. Double-click the icon to open the utility. Information HW Health Set WatchDog HW Health Chapter 4 Supported Software www.dfi .com...
  • Page 61 Chapter 4 Backlight DIO2 Chapter 4 Supported Software www.dfi .com...
  • Page 62 Chapter 4 Infineon TPM Driver and Tool (option) 4. Enter the necessary information and then click Next. To install the driver, click “Infineon TPM driver and tool (option)” on the main menu. 1. Click “Yes“ to continue the installation. 5. Select a setup type and then click Next.
  • Page 63 Chapter 4 Intel USB 3.0 Drivers (For Windows 7 Only) 7. After the installation completed, click Finish. To install the driver, click “Intel USB 3.0 Driver” on the main menu. 1. Setup is ready to install the driver. Click Next. 8.

  • Page 64: Adobe Acrobat Reader

    Chapter 4 Adobe Acrobat Reader 9.3 3. Go through the readme docu- ment for more installation tips then click Next. To install the reader, click “Adobe Acrobat Reader 9.3” on the main menu. 1. Click Next to install or click Change Destination Folder to select another folder.

  • Page 65: Chapter 5 - Digital I/O Programming Guide

    Chapter 5 Chapter 5 - Digital I/O Programming Guide The Configuration Register (register 3) configures the direction of the I/O pins. If a bit in this register is set to 1, the corresponding port pin is enabled as an input with a high-impedence Register Description output driver.

  • Page 66: Sample Code

    Chapter 5 Function Description GPIO Output Process I2CWriteByte(SlaveAddr, SubAddr, Data): #defi ne SLAVE_ADDR 0x42 Write a Byte data to a specified I2C Device. #defi ne INPUT_PORT 0x00 #defi ne OUTPUT_PORT 0x01 I2CReadByte(SlaveAddr, SubAddr, *Data): 0x02 #defi ne INVERSION_PORT Read a Byte data from a specified I2C Device. 0x03 #defi...

  • Page 67: Appendix A - Watchdog Sample Code

    Appendix A Appendix A - Watchdog Sample Code ;Software programming example: ;--------------------------------------------- ;(1) Enter Super IO Confi guration mode ;--------------------------------------------- DX,4EH AL,87H DX,AL DX,AL ;------------------------------------------------------------------------------------------- ;(2) Confi guration Logical Device 8, register CRF0/CRF1 (WDT Control/WDT timer) ;------------------------------------------------------------------------------------------- DX,4EH AL,07H ;Ready to Program Logical Device DX,AL DX,4FH AL,08H...

  • Page 68: Appendix B - System Error Message

    Appendix B Appendix B - System Error Message Standard Status Codes When the BIOS encounters an error that requires the user to correct something, either a beep PEI Status Codes code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, will be shown in the information box at the bottom.
  • Page 69 Appendix B DXE Phase Codes ACPI Checkponts Beep Code DXE Error Codes Appendix B System Error Message www.dfi .com...

  • Page 70: Appendix C - Troubleshooting

    Appendix C Appendix C - Troubleshooting Checklist The picture seems to be constantly moving. Troubleshooting Checklist 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic This chapter of the manual is designed to help you with problems that you may encounter field around the display.

  • Page 71: Hard Drive

    Appendix C Hard Drive System Board 1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card is Hard disk failure. loose, power off the system, re-install the card and power up the system. 1.

This manual is also suitable for:

Bt161Bt100

Table of Contents