Table of Contents
Advertisement
Serial Port
Enable or disable the serial COM port.
Change Settings
Select the IO/IRQ settings for the super I/O device.
RS485 Auto Flow (COM 4 only)
Set the RS485 auto flow of the serial COM port.
Advanced Sleep State Control
Advanced sleep state control (ASSC) function is used to control the system power.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Advanced Sleep State Control
DEEP S5 Enable
[Disabled]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
DEEP S5 Enable
Enable or disable the Advanced Sleep State Control (ASSC) function.
Chapter 3 BIOS Setup
Chapter 3
Enable or Disable (ASSC)
Function. SLP_S5# state
enter Deep S5 state.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
36
When the Advanced Sleep State Control (ASSC) function is set to Enabled, it will
display the following information:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Advanced Sleep State Control
[Enabled]
DEEP S5 Enable
32
PSOUT Delay Time
PSOUT Pulse Width
4
Deep Sleep Delay Time
5
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
PSOUT Delay Time
Enter the value to set the delay time which is (setting value)*16ms. For example, the
maximum delay time = (3F)hex*16ms=1008ms. (Default: 512ms)
PSOUT Pulse Width
Enter the value to set the pulse width which is (setting value)*32ms. For example, the
maximum pulse width = (F)hex*32ms=480ms. (Default: 128ms)
Deep Sleep Delay Time
IO will wait for a delay time before entering into the deep sleep state. For example,
the maximum delay time = 127 second. (Default: 5 sec)
Enable or Disable (ASSC)
Function. SLP_S5# state
enter Deep S5 state.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
www.dfi .com
Advertisement
Table of Contents
