DFI BT160 User Manual page 39

Network Stack Configuration
This section is used to enable or disable network stack settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Network Stack
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
When Network Stack is set to enabled, it will display the following information:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
PXE boot wait time
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Chapter 3 BIOS Setup
[Disabled] Enable/Disable UEFI
network stack.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
[Enabled] Enable/Disable UEFI
[Enabled] network stack.
[Enabled]
0

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Chapter 3
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not
be created.
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not
be created.
PXE boot wait time
Enter the waiting time value to abort the PXE boot.
39
www.dfi .com