DFI BT160 User Manual page 38

CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
CPU Confi guration
Intel(R) Atom(TM) CPU E3845 @ 1.91GHz
CPU Signature 30673
Microcode Patch
31e
CPU Speed
1918 MHz
64-bit
Supported
Processor Cores 4
Intel VT-x Technology Supported
L1 Data Cache
24 KB x4
L1 Code Cache
32 KB x4
L2 Cache 1024 KB x2
Intel Virtualization Technology
[Enabled]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
Chapter 3 BIOS Setup
Chapter 3
When enabled, a VMM can
utilize the additional hard-
ware capabilities provided
by Vanderpool Technology.

Select Screen

Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
38
SATA Configuration
This section is used to enable or disable SATA devices.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Confi guration
Serial-ATA (SATA) [Enabled]
SATA Mode [AHCI Mode]
Serial-ATA port 0 [Enabled]
Serial-ATA port 1 [Enabled]
Serial ATA Port 0
Not Present
Serial ATA Port 1
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Serial-ATA (SATA)
This field is used to enable or disable Serial ATA devices.
Serial-ATA port 0 and port 1
Enable or disable Serial ATA port 0 and port 1.
Enable/Disable Serial
ATA.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi .com