Chapter 1 - Introduction; Specifications - DFI BT160 User Manual

Chapter 1 - Introduction

Specifications

® TM ®
Processor • Intel Atom /Intel Celeron
® TM
- E45: Intel Atom E3845, Quad Core, 2M Cache, 1.91GHz, 10W
® TM
- E26: Intel Atom E3826, Dual Core, 1M Cache, 1.46GHz, 7W
® ®
- J00: Intel Celeron J1900, Quad Core, 2M Cache, 2GHz (2.41GHz), 10W
• BGA 1170 packaging technology
• 22nm process technology
Super I/O • NCT6106/4Eh
Address
• Two 204-pin DDR3L SODIMM sockets (-E45/-E26/-J00)
System Memory
- up to 8GB system memory
- dual channel memory interface
• Supports DDR3L 1333MHz (-E45/-J00)
Supports DDR3L 1066MHz (-E26/)
• DRAM device technologies: 1Gb, 2Gb and 4Gb DDR3L DRAM technologies are
supported for x8 and x16 devices, unbuffered, non-ECC
Expansion Slots • 1 PCIe x1 slot
• 1 Mini PCIe slot
- Supports USB and PCIe signals
- Supports mSATA
- Supports full size Mini PCIe card
• 1 DFI Proprietary Extension Bus for PCIe/PCI expansion
Graphics • Intel ® HD Graphics
• Display ports: 1 VGA, 1 LVDS
• VGA: resolution up to 1920x1200 @60Hz
• LVDS: NXP PTN3460, 24-bit, dual channel, resolution up to 1920x1200 @60Hz
• Supports hardware acceleration for DirectX 11, OCL 1.2, OGL 4.0, H.264,
MPEG2, MVC, VC-1, WMV9 and VP8 (supported version dependent on OS)
®
LAN • 2 Intel I210 PCI Express Gigabit Ethernet controllers
• Integrated 10/100/1000 transceiver
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Serial ATA • 2 SATA 2.0 ports with data transfer rate up to 3Gb/s
- SATA port 0 provides adequate space for SATA DOM
- SATA port 1 multiplexed with mSATA (Mini PCIe)
• Integrated Advanced Host Controller Interface (AHCI) controller
• Provides a Trusted PC for secure transactions
Trusted Platform
• Provides software license protection, enforcement and password protection
Module - TPM*
(optional)
WatchDog Timer • Watchdog timeout programmable via software from 1 to 255 seconds
Damage Free • Monitors CPU/system temperature and overheat alarm
• Monitors VCORE/12V/5V/DDR voltages and failure alarm
Intelligence
• Monitors CPU/system fan speed and failure alarm
• Read back capability that displays temperature, voltage and fan speed
Power • BT160-BN-E45: 10.75W with E3845 at 1.91GHz and 2x 2GB DDR3L SODIMM
• BT161-BN-E45: 16.32W with E3845 at 1.91GHz and 2x 4GB DDR3L SODIMM
Consumption
Chapter 1 Introduction
Chapter 1
®
processors Rear Panel I/O • 1 12V DC-in jack (default) or 4-pin power connector* (optional) - BT161
• 1 DB-9 RS232 serial port
Ports
• 1 DB-15 VGA port
• 2 RJ45 LAN ports
• 1 USB 2.0 port
• 1 USB 3.0 port
I/O Connectors • 1 connector for 2 external USB 2.0 ports
• 1 vertical USB 2.0/1.1 port
• 3 connectors for 3 external serial ports (2.0mm pitch)
- 1 RS232/RS422/485 (RS232 and/or power)
- 2 RS232
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 8-bit Digital I/O connector
• 1 Digital I/O power connector
• 1 LAN LED connector
• 1 LPC connector
• 2 Serial ATA connectors
• 2 Serial ATA power connectors - BT161
• 1 24-pin ATX power connector - BT160
• 1 front panel connector
• 1 chassis intrusion connector
• 2 fan connectors
BIOS • AMI BIOS
- 64Mbit SPI BIOS
Energy Effi cient • Supports ErP Lot6 power saving* (optional)
Design • Supports ACPI
• System Power Management
• Wake-On-Events include:
- Wake-On-USB KB/Mouse* (optional)
- Wake-On-LAN
- Wake-On-PS2 KB/MS* (optional)
- RTC timer to power-on the system
• AC power failure recovery
OS Support • Windows 7 Ultimate x86 & SP1 (32-bit)
• Windows 7 Ultimate x64 & SP1 (64-bit)
• Windows 8 Enterprise x86 (32-bit)
• Windows 8 Enterprise x64 (64-bit)
• Windows 8.1 Enterprise x86 (32-bit)
• Windows 8.1 Enterprise x64 (64-bit)
• Windows 8.1 Embedded Pro x86 (32-bit)
• Windows 8.1 Embedded Pro x64 (64-bit)
Temperature • Operating: 0 o C to 60
o
• Storage: -40 C to 85
6
o C
o
C
www.dfi .com