DFI BT160 User Manual page 46

LCD Control
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [CRT]
Secondary IGFX Boot Display [LVDS]
LCD Panel Type [Type 3 1024x768...]
LVDS Support [Enabled]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no effect if the
external graphics presents. The selection of secondary boot display will appear based
on your selection. VGA modes will be supported only on primary display.
Secondary IGFX Boot Display
Select the secondary display device: CRT, DDI-0 or DDI-1. LVDS is the default setting.
Chapter 3 BIOS Setup
Chapter 3
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear
based on your selection.
VGA modes will be sup-
ported only on primary
display.

Select Screen

Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
46
LCD Panel Type
Select the LCD panel used by Internal Graphics Device by selecting the appropriate
setup item. Please refer to the screen shown below.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [CRT]
Secondary IGFX Boot Display
LCD Panel Type
LCD Panel Type
VBIOS Default
LVDS Support
Type 1 640x480
Type 2 800x600
Type 3 1024x768
Type 4
1280x1024
Type 5 1400x1050 (108MHz)
Type 6 1400x1050 (122MHz)
Type 7 1600x1200
Type 8
1366x768
Type 9 1680x1050
Type 10 1920x1200
Type 11 1440x900
Type 12
1024x768
Type 13
1280x1024
Type 14 1280x800
Type 15 1920x1080
Type 16 2048x1536
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
LVDS Support
Enable or disable the onboard LVDS function.
Select LCD panel used
by Internal Graphics
Device by selecting the
appropriate setup item.
18 Bit
18 Bit
18 Bit
36 Bit
36 Bit
36 Bit

36 Bit Select Screen

Select Item
18 Bit
36 Bit Enter: Select
+/ -:
36 Bit Change Opt.
36 Bit F1: General Help
F2: Previous Values
24 Bit
F3: Optimized Defaults
48 Bit
36 Bit F4: Save & Reset
48 Bit ESC: Exit
48 Bit
www.dfi .com