Super IO Configuration
This section is used to configure the parameters of the super IO chip.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Super IO Confi guration
Super IO Chip
NCT6106D
[Second]
WatchDog Timer Unit
0
Super IO WatchDog Timer
Serial Port 1 Confi guration
Serial Port 2 Confi guration
Serial Port 3 Confi guration
Serial Port 4 Confi guration
Serial Port 5 Confi guration
Serial Port 6 Confi guration
Advanced Sleep State Control
Resume by PS2
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
WatchDog Timer Unit
Select the WatchDog Timer Unit: second or minute.
Super IO WatchDog Timer
Enter the value to set the timeout value of Super IO WatchDog timer. 0 means dis-
abled.
Resume by PS2
Wake up the system by the PS/2 device.
Chapter 3 BIOS Setup
Chapter 3
WatchDog Timer Unit
Selection.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
34
Serial Port 1 Configuration to Serial Port 6 Configuration
Set the parameters of serial port 1 (COM A) to serial port 6 (COM F).
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Serial Port 1 Confi guration
[Enabled]
Serial Port
IO=3F8h; IRQ=4;
Device Settings
Change Settings
[Auto]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Serial Port 2 Confi guration
Serial Port
[Enabled]
Device Settings
IO=2F8h; IRQ=3;
[Auto]
Change Settings
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Enable or Disable Serial
Port (COM)
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
Enable or Disable Serial
Port (COM)
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
www.dfi .com