DencoHappel MATRIX OP21C Operation Manual page 37

MATRIX control panel
7.4.4 Enabling menu options
Activation
Enabled
Activation
Enabled
7.4.5 Deleting settings
Delete program
Really delete?
YES NO
PR-2011-0110-GB • Subject to modifications • R9-03-2016
Example: Activating "Week program"
•
Select the "Week program" menu.
•
Select the "enable / disable" menu option.
The "enabled" menu option appears, and the cursor stands in front of an
option field.
•
Press the key "SET".
The option field changes from "empty" to "black".
– Option field "empty" = disabled, week program switched off
– Option field "black" = enabled, week program switched on
The display changes each time the "SET" button is pressed.
•
When the required condition is displayed, you have to press the "ESC" button
to save this setting and leave the menu option.
Notice!
In this case the "SET" button is NOT used for saving!
Example: Deleting "Week program"
•
Select the "Week program" menu.
•
Select the "delete program" menu option.
The confirmation prompt "Really delete?" appears.
•
Turn the navigator one notch to the left.
Operating MATRIX control panel
37