Modifications And Changes; Spare Parts; Disposal; Selection And Qualification Of Personnel - DencoHappel MATRIX OP21C Operation Manual

MATRIX control panel
3.4

Modifications and changes

3.5

Spare parts

3.6

Disposal

3.7

Selection and qualification of personnel

PR-2011-0110-GB • Subject to modifications • R9-03-2016
PERSONAL INJURY!
The MATRIX control panel may not be operated:
– in explosion risk areas
– in rooms with conductive dust
– in rooms with strong electromagnetic fields
– in rooms with aggressive atmosphere that attacks plastics, for instance.
... in protection type IP20 it may not be operated:
– in humid rooms
– in rooms with dust-laden air
... in protection type IP54 it may not be operated:
– in wet areas
– in areas with high dust content
It is not allowed to modify, add components, or convert the MATRIX control panel
in any way.
Any conversions or modifications as well as tampering with the unit or misappli-
cation of the MATRIX control panel will invalidate the CE conformity and void war-
ranty.
Only original DencoHappel spare parts are allowed, since DencoHappel is not lia-
ble if third-party spare parts are used.
Equipment and operating supply materials must be disposed of according to the
material type in a safe and environmentally friendly manner.
Every person authorized to work on the MATRIX control panel must have read
the entire operation manual and understood it completely – especially the chapter
on safety. Please read this document fully before commencing any work, and not
while performing a task.
Electrical connections may only be carried out by qualified licensed staff or other
individuals with proper professional training and experience in the following ar-
eas:
– Regulations concerning health and safety in the workplace
– Accident prevention regulations
– Directives and recognized codes of practice
All skilled staff must be able to assess the entrusted work and be able to recog-
nize and avoid all associated dangers.
Safety
11