Installing The Replacement Mpm+ Card - Polycom RMX RMX 4000 Hardware Manual

Polycom RMX 4000 Hardware Guide
5
Carefully slide the MPM+ card out through the front panel.

Installing the Replacement MPM+ Card

1
On the card to be installed, move the ejector levers to their fully open
position.
2
Slide in the replacement MPM+ card.
3
Push the MPM+ card firmly into the Backplane, making sure it is
properly seated in its slot.
4
Ensure that the metal ejector levers are fully retracted into their
housings.
5
Tighten the captive screws on the front panel of the RMX that secure
the MPM+ card to the chassis.
2-13