Chapter 2- Component Installation & Replacement
Installing the RTM ISDN 1500 Card
2-2
Prior to adding the RTM ISDN 1500 card you must have your ISDN
product license available. For more information see, RMX 1500/2000/
Getting Started Guide, "Procedure 2: Product Registration" on page 2-20.
1
Ensure that the power switch on the RMX 1500 is turned OFF (O).
2
Loosen the captive screws that fasten the card to the MCU.
3
Slide in the RTM ISDN 1500 card.
4
Insert the card into the slot and tighten the captive screws on each
side of the rear panel of the card, securing the RTM ISDN card to
RMX.
Need help?
Do you have a question about the RMX DOC2557C and is the answer not in the manual?