Inserting An Air Filter (Optional) In The Fan Drawer - Polycom RMX RMX 4000 Hardware Manual

Chapter 2- Component Replacement

Inserting an Air Filter (Optional) in the Fan Drawer

2-10
In the fan drawer, an Air Filter can be added as an option. You must order
this part through your next level of support.
1
Ensure that the power switch/circuit switch on the RMX 4000 is
turned OFF (O).
Warning!
The air filter cannot be replaced when the RMX 4000 unit is ON.
2
Unscrew the captive screws on the front panel of the Fan drawer
secured to the Fan chassis.
3
Use the finger grip, pull the Fan drawer out of its slot in the
Backplane.
4
Carefully slide the Fan drawer out through the front panel.
Finger
grip