Installing The Readiconvene Iam Blade In The Mgc+ Unit - Polycom ReadiConvene MGC+50 Getting Started Manual

ReadiConvene Getting Started Guide
Figure 1-3
Installing the ReadiConvene IAM Blade in the MGC+
Unit
This section is relevant only to MGC+ systems that are being upgraded to
the ReadiConvene by installing the ReadiConvene IAM blade.
The ReadiConvene IAM blade can be installed with the MGC+ unit ON or
OFF. Refer to Table 1-2 on page 1-9 for more detailed instructions.
8
ReadiConvene IAM I/O Connections
It is important that you follow the sequence of steps as defined in sections
below.
Polycom, Inc.