Rear Panel Connections
Rear Panel Connections
USB Port
Mouse Port
Keyboard Port
AC Power
Two Power
Cords
Power Good
LEDs
Power Supply
Locks
Polycom, Inc.
Inlets
1
Connect Cables
Connect the power cords.
1
Connect the Ethernet cable to port 1.
2
Connect any other required cables.
3
NOTE: Both power cords need to be plugged into the appliance. If they are not
both plugged in there is an alarm that sounds providing an alert that there is an
issue with the unit
Polycom Digital Signage Server Hardware Setup
Serial Port
PCI Expansion Slots
VGA Port
2
Ethernet Cable
Network Interface
Connector
17