Model 1039 Control Features - AEMC 1035 User Manual

2.3

Model 1039 Control Features

1. Safety terminals - Ø 4mm (marked "mA", "+" and "-"). Next to the "-"
terminal, there are two additional contacts for connecting the remote
control probe (3-Point connector).
2. Backlight liquid crystal display
3. Buttons: Yellow (to activate insulation measurement)
ALARM, ,
4. 7-position switch:
OFF, MΩ - 50V, MΩ - 100V, 40kΩ, 4000nF, 400mA, 400V~
5. Battery compartment and stand (not shown in the drawing)
Shop for AEMC products online at:
8
, and ΔREL (see § 2.7)
ShopAEMC
www.
Digital Analog Megohmmeter Models 1035/1039
Figure 2
.ca 1.877.766.5412