Chapter 5 Summary Of Parameters - Danfoss 176F7300 Manual

Chapter 5
Summary of Parameters
This chapter summarizes all 10 of the parameter groups. For complete descriptions of
individual parameters refer to Chapter 4.
No. Parameter Function
Name Explanation
00 Master Speed Master frequency
Frequency source select
Setting
01 Operation Operation
Command command
Source source select
02 Motor stop Motor stop
method method select
03 V/F Curve Max output freq.
04 Setting Max voltage freq.
05 (13 & 14) Max output volt
06 Mid-point freq.
07 Mid-point volt
08 Min output freq.
09 Min output volt
10 Accel/Decel Acceleration time 1 d0.1 - d600. sec
11 Time Setting Deceleration time 1 d0.1 - d600. sec
12 Acceleration time 2 d0.1 - d600. sec
VLT
Parameter
Value
d00:Master frequency input
determined by the digital
control panel
d01:Master frequency input
determined by the analog
signal (DC 0 to +10 V)
d02:Master frequency input
determined by the analog
signal (DC 4 to 20 mA)
d00:Operating instructions
determined by the digital
control panel
d01:Operating instructions
determined by the external
terminal connections,
keypad STOP key effective
d02:Operating instructions
determined by the external
terminal connections, keypad
STOP key not effective
d00:RAMP stop
d01:Coasting to stop
d50.0 - d400. Hz
d10.0 - d400. Hz
d2.0 - d255.0 V
d0.1 - d400. Hz
d002.0 - d255. V
d0.1 - d20.0 Hz
d2.0 - d50.0 V
62
® MICRO
Factory
Setting
d00
d00
d00
d60.0
d60.0
d220.
d1.50
d12.0
d1.50
d12.0
d10.0
d10.0
d10.0